Blackhawk engine

Thoughts, Ideas and General Questions
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Blackhawk engine

Post by daveinglasgow »

and please all remember that we are the cheapest honda dealer in the uk ( we deliver uk wide as well) and offer servicing discounts for those of you in Scotland if you are a FULL member of this forum.

sorry I know that was a big sales plug :D

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Blackhawk engine

Post by daveinglasgow »

what are you top revs please?
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
colinpearce
Posts: 76
Joined: Tue Mar 15, 2011 12:28 pm
Location: Yala, Black Hawk, Honda 90HP, Trailered Anglesey

Re: Blackhawk engine

Post by colinpearce »

The speedo on our GPS is in MPH, we get 33 MPH at 5500 RPM and 25 MPH at 3500 RPM. No idea what the prop is :oops: We have got trim tabs which I think help with lower speed, certainly help stop her leaning over, the missus hates that :lol:
GDP
Posts: 2
Joined: Wed Mar 14, 2012 5:31 pm

Re: Blackhawk engine

Post by GDP »

I'm facing a similar dilemma at the moment with my 570. Just got hold of a 75hp Mercury 4 stroke weighing in at 180kg. Obviously the extra weight is a concern, although Dave @ Clyde Outboards has reassured me all should be fine via the World Sea Fishing forum. Any other members experience with similar set up would be interesting and most welcome.

BTW - just joined the forum - great source of info!
colinpearce
Posts: 76
Joined: Tue Mar 15, 2011 12:28 pm
Location: Yala, Black Hawk, Honda 90HP, Trailered Anglesey

Re: Blackhawk engine

Post by colinpearce »

We were offered a 115 Mariner at a price we couldn't refuse. Is it the same block as the 75? It weighed 180Kg too. Our concerns apart from the weight was the physical size of it, we were convinced it would be to big to fully tilt back, whether it could or not we never found out
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Blackhawk engine

Post by daveinglasgow »

Boris

you need to up a pitch on your prop

dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Blackhawk engine

Post by daveinglasgow »

it was more based on your top revs. I think you should call Cameron my Honda geek and if you can please do it after 3.00 today or sometime Wednesday as we are filming a few short video's.

workshop is 01475 635 700

mmm I think I might add this as a new must do for all engine sales. It is amazing how many engines are under or over revving out there.

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices