Page 1 of 3
My Shetland Family Four 4 Rebuild
Posted: Fri Sep 14, 2018 10:54 am
by Franknstein
Hi All
I've been a member here a few years during my ownership of my F4.
I bought the boat from a yard in essex for £1000. It was just the hull, used as a fishing boat so was in bad condition. The deck was completely rotten.
I thought I'd share my photos of the rebuild so far.
I also bought a snipe trailer on gumtree for £500 and completely rebuilt that too with new axle, bunks, bunk supports, and coupling.
Sorry the pictures are not in order, but there are a lot of them:
https://imgur.com/a/9mZTvpp
Re: My Shetland Family Four 4 Rebuild
Posted: Sat Sep 15, 2018 9:40 am
by vreagh
Well done! Both boat and trailer look set to provide many more years of use. What foam did you use under cockpit sole ?
Re: My Shetland Family Four 4 Rebuild
Posted: Mon Sep 17, 2018 9:59 am
by Franknstein
Hi
I kept the original foam - which I dried out over a summer. Dug a hole in the middle of it and water kept draining into the hole. It eventually dried completely after many times bailing it out. I then put 18mm marine ply and filled all the voids with 2 part polyurethane closed cell foam.
Re: My Shetland Family Four 4 Rebuild
Posted: Tue Sep 18, 2018 1:54 pm
by rob
Just looked at all your photos, great work, well done.
Re: My Shetland Family Four 4 Rebuild
Posted: Sat Oct 06, 2018 7:16 am
by Franknstein
Just finished varnishing and installing the newly rebuilt cabinetry... pics...
Re: My Shetland Family Four 4 Rebuild
Posted: Sun Oct 07, 2018 9:30 am
by Freebird19
Nice job! Thanks for sharing the photos.
Re: My Shetland Family Four 4 Rebuild
Posted: Mon Oct 15, 2018 9:49 am
by Franknstein
Latest progress, skirtings attached..
Re: My Shetland Family Four 4 Rebuild
Posted: Wed Oct 17, 2018 1:19 pm
by daveflack
Hi Frankenstein,cracking pics your boat looks great. Question, could you possibly shed some light on the problem that Adam has got in the general section,basically he has a hole in his transom & needs to know if a bung is fitted cheers Magic
Re: My Shetland Family Four 4 Rebuild
Posted: Thu Oct 18, 2018 1:44 pm
by Adam
Thanks Dave, very appreciate.
Frankenstein - amazing job mate. I will definitely have dozens of questions to you about the boat/project. I've bought F4 MK3 last week and want to make her mine so okenty of small bits to do. The floor seems to be solid but there's still plenty to do.
Adam
Re: My Shetland Family Four 4 Rebuild
Posted: Mon Oct 22, 2018 8:53 am
by Franknstein
Thanks for the kind words guys. Happy to assist where I can. You only really know exactly how to do a project once its finished
