4+2 replacement windows and fixings

Missing a vital part? Need to track down a spare? Just ask.
Peacock139
Posts: 1
Joined: Thu Apr 27, 2017 9:49 pm

4+2 replacement windows and fixings

Post by Peacock139 »

Hi all. I have just purchased my first Shetland 4+2. I have a slight crack in the front window which is letting in a small amount of water which is staining the carpet and I'd like to replace it along with both side windows. Is there a supplier where I can purchase the new windows ready to install? Thanks in advance.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: 4+2 replacement windows and fixings

Post by dellquay13 »

Hi,

Do you mean cabin or cockpit windows?

The cabin windows are probably oversized and simply bolted and sealed over the aperture rather than sitting inside a rubber or metal frame, like earlier shetlands.

You have 3 broad options for replacements. You can try Shetland themselves, you could try googling boat windows and contacting any bespoke boat window suppliers to see if they have the patterns on file from previous customers, or you can make your own paper templates for them or your local perspex supplier. The best results usually come from giving the supplier your actual windows to copy, but since yours will be overfitted, any slight variations won't matter.

Most suppliers will not drill the fixing holes, because they don't want to get them wrong.

I have had a replacement screen from Shetland, and can't say I was happy with the service, price or product. Generic perspex suppliers might not be used to making boat windows, like adding the bevels along the edges.

The fixings are available on the internet, use nylon instead of stainless, especially if you use countersunk machine screws. Pan head screws and straight holes have the most strength, but the screws sit proud. With countersunk screws you have to be careful not to drill too deep when you countersink the perspex, and you can crack the perspex if you overtighten.

You will need sealant between the perspex and the hull. Shetland can supply a form of self amalgamating tape (not the generic stuff electricians and satellite installers use) which is easy to use. Lots of people use sikaflex 291 which is cheaper, works well, but can be really messy.

Hope this helps,

Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...