Family four details

Thoughts, Ideas and General Questions
Jamiem3594
Posts: 5
Joined: Mon Aug 28, 2017 6:43 pm

Family four details

Post by Jamiem3594 »

Hi there just boat a family four, but can anyone tell me what the minimum and maximum outboard size is and also outboard shaft length. The boat is getting used on scottish freshwater lochs only cheers jamie
vreagh
Posts: 327
Joined: Sat Aug 02, 2014 5:46 pm
Location: Cornwall

Re: Family four details

Post by vreagh »

According to boat specs, max power in 90hp. Can't help with shaft length. I have a 5hp auxiliary outboard on 535 and that can push the boat at 6-7 knots at sea if there's a problem with main engine. It all depends what is intended use.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Family four details

Post by dellquay13 »

Hi,

All models of F4 take long (20") shaft engines when transom mounted, shaft lengths for auxiliary brackets vary depending on how and where they are mounted. I use a short shaft on my aux bracket.
The max outboard for an F4 mk1-4 is 70hp, and 90hp for mk5 (1988?) on. The question may be what is an appropriate size, loch Lomond has a high speed limit so a big engine is fine, other fresh water lochs may have significantly lower limits so you may need nothing bigger than an 8hp. The minimum size is 3.5-4hp for an auxiliary outboard, with 6-8hp for a main engine with 6knot or displacement (no wake or wash) speed limits, or 60hp to 90hp if you are allowed to go fast enough to get onto the plane, typically above 14knots in a F4 with 2 adults and weekend kit, food, fuel, booze etc.

Hope this helps,

Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...