Family 4 anchor locker drain hole

Thoughts, Ideas and General Questions
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Family 4 anchor locker drain hole

Post by Adam »

To F4 owners - do you have through hull anchor locker draining hole in your boats? Mine is just 5 inches above a water level which is quite strange. How's yours? See pics.
You do not have the required permissions to view the files attached to this post.
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Family 4 anchor locker drain hole

Post by dellquay13 »

Hi,

My boat has one, but not as rough looking as yours. It's 1" back on the starboard side and had a round plastic trim on the outside which fell off. Yes it lets waves in being low down, but they drain straight back out.

Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Re: Family 4 anchor locker drain hole

Post by Adam »

Thanks Chris!
As you're saying - it usually is on the starboard. Maybe MK3 has drain hole located on the front?
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
User avatar
Freebird19
Posts: 79
Joined: Tue Jan 12, 2016 5:57 pm
Location: Black Hawk "Freebird" Norfolk

Re: Family 4 anchor locker drain hole

Post by Freebird19 »

My Blackhawk has it centred on the bow, as in the picture. Discovered it was blocked and the locker was six inches deep in water! To top it all off the fiberglass back to the locker was damaged from the mud weight and the plywood is all sodden!
Franknstein
Posts: 35
Joined: Tue Jan 19, 2016 8:24 am

Re: Family 4 anchor locker drain hole

Post by Franknstein »

Mines also on starboard side, above the waterline.
I'd fill that and drill a hole on starboard side about 2 inches above waterline, then insert a threaded drain and seal with sika.