Shetland 498

Thoughts, Ideas and General Questions
Deleted User 20990

Shetland 498

Post by Deleted User 20990 »

Hi there I am newish to the forum, I have been left a 498 from a friend that recently passed, it has a Yamaha 50 4 stroke on the back, and a full canopy fitted, I will be removing it and going to fit a Tonneau cover ( I think that's what their called ) I have had boats in the past and currently use a sib for fishing in sea Lochs, what weight of anchor should I be using on this boat? I intend to replace all windows in the spring as all leak badly, the engine was serviced last year and never used so it should be fine! is there anything else that I should be looking for!
DSC02029.JPG
You do not have the required permissions to view the files attached to this post.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Shetland 498

Post by dellquay13 »

Hi,
You can keep the pram hood, and still use a tonneau cover for storage, they are not mutually exclusive.
Anchors are really hard to recommend, if we don't know what the local conditions are like, such as typical sea beds, size of tides and currents, how exposed or sheltered your cruising range is and whether you are just stopping to fish or thinking of sleeping at anchor.
I use a 5kg Danforth style with 5m of 8mm chain then 3m of 10mm and finally 2m of 12mm chain (increasing in weight further from the anchor to hold it down better and avoid wave snatch) for stays of a few hours in all but the biggest (7m+) fast tides off Pembrokeshire, but I wouldn't consider it safe enough to sleep on, or to hold on any tidal races over sandbanks.
The best advice for an anchor will come from other boaters in your immediate area.
Hope this helps,
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...