Hi all,
Just joined the club today and would like to say hello.
I pick up a Shetland family 4 from a friend of mine and few years back which was in need of a bit of TLC. I am new to boating and have just managed to get it on the water over the Christmas, there was a mercury 25hp on it which I replaced with a evinrude etec 50hp it came with a 13X .25 X 17 prop. I was hoping if someone could recommend a suitable size prop as I think the 17 is a bit big.
Kind regards Ollie
New member, propeller size.
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: New member, propeller size.
Hi,
You need to know your current max rpm with that prop and the recommended max rpm for the motor to know if it is right. Each increase of 1" for the prop will decrease the max rpm by around 200rpm, and decreasing the prop will increase the rpm by the same ratio. Your 50hp etech is about the smallest motor you can realistically get good results from on an F4, so aim for a prop size getting you to the upper end of the motor rpm band, and it will help with keeping you on the plane at anything less than full throttle.
Chris
You need to know your current max rpm with that prop and the recommended max rpm for the motor to know if it is right. Each increase of 1" for the prop will decrease the max rpm by around 200rpm, and decreasing the prop will increase the rpm by the same ratio. Your 50hp etech is about the smallest motor you can realistically get good results from on an F4, so aim for a prop size getting you to the upper end of the motor rpm band, and it will help with keeping you on the plane at anything less than full throttle.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
Ollie
- Posts: 3
- Joined: Wed Jan 09, 2019 7:28 pm
Re: New member, propeller size.
Hi Chris,
Thanks for the reply l now known it was a bit vague to start with as there is a lot to take in to account when choosing the right prop. I will start by getting a tachometer and then try a few different size props.
Like I said I am a bit new to all this.
Thanks again.
Ollie
Thanks for the reply l now known it was a bit vague to start with as there is a lot to take in to account when choosing the right prop. I will start by getting a tachometer and then try a few different size props.
Like I said I am a bit new to all this.
Thanks again.
Ollie
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: New member, propeller size.
Hi,
With a tacho and using your existing prop, you can make a pretty accurate prediction of what size you will need, without the expense or inconvenience of trying a range of props.
If your prop is aluminium, it can be repitched to whatever you want, although changing more than a couple of inches can be unsatisfactory because props tend to work best when the pitch is broadly (inversely)matched to the diameter. I have used a company called steel developments, who sell Solas props online, to repitch as well as repair damaged props.
Chris
With a tacho and using your existing prop, you can make a pretty accurate prediction of what size you will need, without the expense or inconvenience of trying a range of props.
If your prop is aluminium, it can be repitched to whatever you want, although changing more than a couple of inches can be unsatisfactory because props tend to work best when the pitch is broadly (inversely)matched to the diameter. I have used a company called steel developments, who sell Solas props online, to repitch as well as repair damaged props.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: New member, propeller size.
Hi,
I've just googled the specs for e-Tec 50's and the operating range is 5500-6000rpm at full throttle. Find out using a tacho what max rpm your current 17" prop gives, and work out using the +1"= -200rpm or -1"= +200rpm formula to predict how other sizes would perform, and what size would get you closest to 6000rpm. When you test your prop, make sure your boat is loaded as normal, not half empty.
Chris
I've just googled the specs for e-Tec 50's and the operating range is 5500-6000rpm at full throttle. Find out using a tacho what max rpm your current 17" prop gives, and work out using the +1"= -200rpm or -1"= +200rpm formula to predict how other sizes would perform, and what size would get you closest to 6000rpm. When you test your prop, make sure your boat is loaded as normal, not half empty.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
Ollie
- Posts: 3
- Joined: Wed Jan 09, 2019 7:28 pm
Re: New member, propeller size.
Hi,
Thanks for that, I will let you know how I get on.
Regards Ollie.
Thanks for that, I will let you know how I get on.
Regards Ollie.