I currently have 4 keel rollers and 2 side bunks for my 535. Sometimes I struggle getting the boat back on the trailer depending on wind direction and tide. I've thought about wider keel rollers, replacing bunks with rollers, floatem poles etc etc. However, I've never seen anyone struggle with a roller coaster type but also never seen a 535 on a roller coaster.
Is a 535 suitable for a roller coaster type as there is slight flex in the hull where it would sit on one or are the 535's designed purely for keel load trailers with them having a solid stub keel the full length
Trailer for 535
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Trailer for 535
Hi
I converted my old keel roller and bunk trailer to all rollers and had no problems with it. I put 3 double roller swing arms each side, setting it up with my Family 4 on it. Having said that I always float the boat off instead of rolling it down, and float it back on apart from the last 12-18" which I winch it back up to the post. It usually centred up nicely between the side rollers.
When I replaced the trailer I bought another one with both keel and swing bar rollers.
I don't think keel-less rollercoaster trailers had been invented before 535s had been replaced by the 536/F4.
Chris
I converted my old keel roller and bunk trailer to all rollers and had no problems with it. I put 3 double roller swing arms each side, setting it up with my Family 4 on it. Having said that I always float the boat off instead of rolling it down, and float it back on apart from the last 12-18" which I winch it back up to the post. It usually centred up nicely between the side rollers.
When I replaced the trailer I bought another one with both keel and swing bar rollers.
I don't think keel-less rollercoaster trailers had been invented before 535s had been replaced by the 536/F4.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
gtcamm
- Posts: 14
- Joined: Sat Jul 14, 2018 7:40 am
Re: Trailer for 535
So is your boat still sat on keel rollers?
My bunks sit against the planing chines and if I rock the boat there is a slight flex in the fibreglass.
I'm just wondering because the 535 has a 2" keel, has it been partly designed to sit on its keel to take its weight when sat on the trailer?
Like you say, keeless roller trailers wouldn't have been around back in the 535 manufacturing days but boy the set ups that do use them makes retrieving a doddle
My bunks sit against the planing chines and if I rock the boat there is a slight flex in the fibreglass.
I'm just wondering because the 535 has a 2" keel, has it been partly designed to sit on its keel to take its weight when sat on the trailer?
Like you say, keeless roller trailers wouldn't have been around back in the 535 manufacturing days but boy the set ups that do use them makes retrieving a doddle
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Trailer for 535
My trailer is a centre keel roller model like the one in the picture. The side rollers are positioned for stability rather than load bearing, as my F4 also has an amount of flex in the flat areas of hull, so the real loading goes on the keel rollers. My side rollers are simple to adjust by slackening the u-bolts. I have marked the best positions for them, so I can drop them one at a time when antifouling.
I have no issues getting the boat off by immersing enough until the boat floats fully and simply reverse away, and easy recovery by knowing how far to dunk the trailer to float almost up to the winchpost, and winch up the last 12" when recovering, to make sure the boat is properly lined up with the rollers. I just put a watermark on the trailer once after getting the boat back on, to make it easy to get the depth right every time since.
I have no issues getting the boat off by immersing enough until the boat floats fully and simply reverse away, and easy recovery by knowing how far to dunk the trailer to float almost up to the winchpost, and winch up the last 12" when recovering, to make sure the boat is properly lined up with the rollers. I just put a watermark on the trailer once after getting the boat back on, to make it easy to get the depth right every time since.
You do not have the required permissions to view the files attached to this post.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...