SHETLAND SPEEDWELL WINDSCREEN

Missing a vital part? Need to track down a spare? Just ask.
Toprodnumber1
Posts: 10
Joined: Thu Jun 28, 2018 4:56 pm

SHETLAND SPEEDWELL WINDSCREEN

Post by Toprodnumber1 »

Hi,

Can any one please help i need a paper / cardboard template from the windscreen of a shetland speedwell i will pay for for the template and for postage thanks in advance.
I will even come and do it myself.

cheers Neil.
Bruce123
Posts: 36
Joined: Thu Sep 07, 2017 5:58 pm

Re: SHETLAND SPEEDWELL WINDSCREEN

Post by Bruce123 »

Toprodnumberone
Did you have any luck with finding a template for your speedwell windscreen and do you intend to make one yourself If so how do you intend to bend the sheet to get the curves
Bigjo
Posts: 9
Joined: Wed Sep 04, 2019 4:07 am

Re: SHETLAND SPEEDWELL WINDSCREEN

Post by Bigjo »

I bent a sheet of Perspex using a heat gun for a club rib ok, but it was a hard 90 degree bend. Have to be careful of overheating to avoid bubbling though. I would think it would be as easy for a bend with less radius.
Toprodnumber1
Posts: 10
Joined: Thu Jun 28, 2018 4:56 pm

Re: SHETLAND SPEEDWELL WINDSCREEN

Post by Toprodnumber1 »

Hi Bruce,

No need to heat up.
I cut the 5 mm poly-carbonate sheet to the template i have,lined it up to the boat marked and drilled the center hole and fixed it in position.
I then worked my way around to the right and the next hole, drilled and fixed it then moved to the opposite side and did the same,working until all holes were drilled and windscreen was fixed in correct position.

It bent around the curves no problem it was quite a warmish day so the screen wasn't cold but i didn't heat it up.


Regards Neil.

send me a message if you need more info but fixed no problem.
Toprodnumber1
Posts: 10
Joined: Thu Jun 28, 2018 4:56 pm

Re: SHETLAND SPEEDWELL WINDSCREEN

Post by Toprodnumber1 »

Hi Bigjo,

Sorry i called you Bruce got mixed up with someone else who asked a question.

Cheers Neil.