Repairs

Thoughts, Ideas and General Questions
Post Reply
Yare
Posts: 12
Joined: Mon Feb 25, 2019 7:25 am

Repairs

Post by Yare »

Hi
I have a 2007 Family four and several of the fixings such as fender eyes and canopy clips have come lose and will not screw back in.
Reluctant to try a longer screw and wondered if anyone had any suggestions for a compound to use to re secure these screws?
Also the socket for the table leg in the cabin has broken up,any ideas where i can get a replacement?

Many thanks all,

Tony
535Mustard
Posts: 177
Joined: Sun Dec 29, 2019 11:07 am

Re: Repairs

Post by 535Mustard »

Rawl plugs in the holes then put the screws back in.
Not as good as filling the holes in fully but works well.
Adam
Posts: 86
Joined: Tue Oct 02, 2018 4:38 pm

Re: Repairs

Post by Adam »

Filling the holes would be the best solution.
You can use good fibreglas paste to get it done. Its hard like a stone when hardened but it has to be done properly - redrilled, perfectly cleaned etc etc.
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
Yare
Posts: 12
Joined: Mon Feb 25, 2019 7:25 am

Re: Repairs

Post by Yare »

Thanks all, appreciated.
Post Reply