New owner Shetland Family four advise

Thoughts, Ideas and General Questions
Lokithorrr
Posts: 3
Joined: Wed Mar 10, 2021 10:03 am

New owner Shetland Family four advise

Post by Lokithorrr »

Good morning, "Lucky Lady" was delivered yesterday.
She need alot of works and hopefully after couple months she will have a new look.

Can someone advise where, which type i can buy of:

- steering wheel and mount
- speed, RPM gauge
- canopy

Also in back i want make hand rails just to make more secure for children and install rod holder.

thanks for advices
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New owner Shetland Family four advise

Post by dellquay13 »

Hi Lokithorr,

Which country are you based in? Where to buy things depends on where you are, especially after Brexit.

There are a few brands of steering wheels and mounts. Teleflex make good steering systems and lots of steering wheels for boats will fit, if you check the specifications for teleflex.
The teleflex website has a guide on how to measure your boat to get the correct length cable.

Faria make some good speedometer and rpm meters, the rpm meter will have to match the number of poles on the alternator on your outboard motor. They are quite expensive as they are a US brand, but they supply both Evinrude and Johnson with their gauges.
Most powerboaters simply use a marine gps or chartplotter for their speed, or even a smartphone, as mechanical speedometers show speed through water, rather than speed over ground, and speed through water is of more concern to Sailboats or slow speed river boats with speed limits than it is to powerboaters with big engines.

Shetland boats will sell you a canopy and frame but will need to know from a photograph which version of the F4 you have, mk1, etc.
After buying a windscreen from Shetland, I personally shop elsewhere now, other canopy suppliers are available near most popular boating areas.

A rear hand rail would have to be engineered to order by a steel fabricator, as the F4 never had one, and would interfere with fitting most styles of canopy. I would consider simply using a lifeline to the children's lifevests!

Hope this helps,

Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Lokithorrr
Posts: 3
Joined: Wed Mar 10, 2021 10:03 am

Re: New owner Shetland Family four advise

Post by Lokithorrr »

Im from Doncaster, UK. not sure which model but serial number is 1190.

started already with renovation. Yesterday stripped down everithing from the cocpit and the deck and the roof.

before i start renovating walls and cieling in cabin do i need replace windows or after? need to find fittings...
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New owner Shetland Family four advise

Post by dellquay13 »

Sorry I thought you were European with the Norse gods name.
I'm just down the road in Bolsover, but my boat is in far west wales.
The serial number doesn't tally to a Family Four, it suggests you have a much earlier boat, like a 535, F4s began at about #8556. If you can post some pictures we can say for certain.
If you are fitting new windows, do it first.
Are you going to be inland or coastal?
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Lokithorrr
Posts: 3
Joined: Wed Mar 10, 2021 10:03 am

Re: New owner Shetland Family four advise

Post by Lokithorrr »

Thanks, I have no idea how to post here any pictures :?
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: New owner Shetland Family four advise

Post by Clive »

You need to sign up and pay a one off fee of £5. Then the world is yours!
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.