Hello fellow Shetland enthusiasts. I am considering purchasing a Shetland 640 hardtop with inboard BMC 1500 Diesel engine. The cruising speed is around 5 knots.
My question is, with a planing hull and low speed will the 640 be difficult to steer and have a tendency to wander?
I have had some previous boats which proved very difficult to steer at low speed so want to avoid this if possible.
Thank you in advance for any thoughts.
Shetland 640
-
vreagh
- Posts: 327
- Joined: Sat Aug 02, 2014 5:46 pm
- Location: Cornwall
Re: Shetland 640
If it's a full inboard with sterngear and rudder, it shouldn't be much different to other displacement boats. If it's a inboard/outboard unit then you will find a rudder behind the prop will help handling.
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Shetland 640
My 4+2 is very wandery - is that a word?! Is a prop guard better than a rudder? As I tow the prop guard seems a better option but involves drilling into the engine to install. A rudder clamps on I think.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
Kinlough
- Posts: 3
- Joined: Mon Aug 03, 2020 2:43 pm
Re: Shetland 640
Thank you for your replies. The boat is driven by an Enfield out drive so no rudder.
As far as I know the 640 is very similar to the 4+2 apart from a different cabin berth/dinette configuration.
I am having doubts now whether a Shetland 640 would be the right boat for me. It has a hardtop so I like the sheltered helm position but this could also be a real wind catcher on blustery days.
As far as I know the 640 is very similar to the 4+2 apart from a different cabin berth/dinette configuration.
I am having doubts now whether a Shetland 640 would be the right boat for me. It has a hardtop so I like the sheltered helm position but this could also be a real wind catcher on blustery days.
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Shetland 640
Most of this type of boat will wander. Problem goes away with more speed as the hull shape increases stability. 640s manufacturing was stopped a long time ago. The 4+2 might be a better solution and the come with hard too versions.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.