Hi all and thanks for letting me in.
Hopefully I have successfully attached a photo of my new acquisition. a 1989 Shetland Four plus Two.
I don't have the boat at home yet so can anyone tell me what the largest Danforth or Claw anchor is that will fit in the bow storage well?
Many thanks, Brian
Newbie with an anchor question
-
BrianT
- Posts: 3
- Joined: Wed Apr 27, 2022 8:58 am
- Location: Southampton
Newbie with an anchor question
You do not have the required permissions to view the files attached to this post.
4 +2 with 15HP outboard
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Newbie with an anchor question
I don't know the 4+2 anchor locker, but unless you are regularly anchoring in mud, both Danforths and Bruces have quite low holding power compared to more modern designs like a Delta. At least Danforths (and their copies) take up little room aboard.
What do other motor boaters in your area use? (Don't ask yachties though, 3 people will give you at least 4 different replies)
What do other motor boaters in your area use? (Don't ask yachties though, 3 people will give you at least 4 different replies)
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Newbie with an anchor question
Me too on this one. Mine is 1988 so I imagine the same. I have no anchor and plan to get one. What ever you get, allow twice the length of the boat in chain then rope for the rest (so I've read), this should help with drag. I've read quite a lot but don't seem to retain the info so will be watching out for any replies.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
BrianT
- Posts: 3
- Joined: Wed Apr 27, 2022 8:58 am
- Location: Southampton
Re: Newbie with an anchor question
Haha, know what you mean about yachtiesdellquay13 wrote: Tue May 10, 2022 10:41 pm I don't know the 4+2 anchor locker, but unless you are regularly anchoring in mud, both Danforths and Bruces have quite low holding power compared to more modern designs like a Delta. At least Danforths (and their copies) take up little room aboard.
What do other motor boaters in your area use? (Don't ask yachties though, 3 people will give you at least 4 different replies)
Thanks for the info. Will be mooring in the Solent and Itchen so mostly soft substrate. I have to tow the boat from Suffolk to Southampton on 1st June so will measure the hatch then. We will antifoul it and check/replace anodes on outboard then it will go into the water on the 4th June.
4 +2 with 15HP outboard
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Newbie with an anchor question
Big anchors need a lot of setting, and if they aren't completely buried they aren't fully effective.
I have a 5kg Delta copy with 20m of 6mm chain then rope to hold a 24' 1.5t yacht in the Bristol channel, and I chose that from the manufacturers size chart. Being relatively small, it is easier to fully set with a 10hp inboard than the 10kg cqr copy the previous owner used.
I have a 5kg Delta copy with 20m of 6mm chain then rope to hold a 24' 1.5t yacht in the Bristol channel, and I chose that from the manufacturers size chart. Being relatively small, it is easier to fully set with a 10hp inboard than the 10kg cqr copy the previous owner used.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...