trying to find a seat support for a shetland 570. have the helm seat and support, but want same for opposite side of cockpit
steve at [email protected]
570 helm seat support
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: 570 helm seat support
We needed to raise our 570 helm seat as hubby is 6ft 2and needed more leg room so we rebuilt ours copying the old one.
I can so recommmend these people for the ali tubing http://www.aluminiumwarehouse.co.uk/
Very fast delivery and good value. we used the square/box tube for the frame and flat Ali for the cross struts. The joins were done using easifix
SIMPLES!
Took about 3 hour one afternoon and believe me when I say my hubby is no DIY expert
ADMIN
I can so recommmend these people for the ali tubing http://www.aluminiumwarehouse.co.uk/
Very fast delivery and good value. we used the square/box tube for the frame and flat Ali for the cross struts. The joins were done using easifix
SIMPLES!
Took about 3 hour one afternoon and believe me when I say my hubby is no DIY expert
ADMIN
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
silversailor
- Posts: 29
- Joined: Thu Oct 20, 2011 3:45 pm
- Location: norfolk
Re: 570 helm seat support
Many thanks will give them a call.
Steve
Steve
-
deeandmartin
- Posts: 99
- Joined: Sat Feb 26, 2011 12:42 pm
- Location: No boat at present based in Mid Wales
Re: 570 helm seat support
We took our old frame out and replaced it with a fully adjustable and swivel pedestal. We fibreglassed a circle of wood slightly larger than the ped base to the deck, then bolted an identical sized piece to the base also attaching the ped base creating a sandwich effect. This also ensures a strong and secure base, it certainly worked for us and has the. Benefit of Being used when swivelled as additional cockpit seating.