Hi all,
I've just bought a Black Hawk as a bit of a project so will be asking lots of questions over the next few weeks.
I bought a Silverline polisher (looks like an angle grinder) and started to polish the gel coat today with T-cut (only using the slowest speed). I applied the T-cut by hand and used a lambs wool bonnet to polish off. All was well until I cleaned the bonnet after it became dirty and spin dried using the polisher on a high speed. Once I tried using the bonnet again (on the lowest speed) when it was damp the polisher made a mess of the gel coat by actually dulling it again and wet gelcoat/Tcut mix dirtied the bonnet.
I had to finish the polishing by hand using stockinette. The deeper scratches in the hull (similar to marks on cars that have been keyed) were still highly visible.
Can anyone please give me tips on what to use and how to remove the deeper scratches from my green gelcoat please.
Thanks
Billy
Polishing tips for gel coat?
-
consumedbynature
- Posts: 38
- Joined: Wed Apr 20, 2011 9:21 am
- Location: Billy Keys, Shetland Black Prince, River Avon Worcestershire
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: Polishing tips for gel coat?
Th best cleaner and polishing is a new product by FBC after a couple of the main manufactures went bump. but like all boating products its not cheap at £12.00 per bottle and you would buy an cleaner and a wax.
can post down if youirinterested.
Dave
can post down if youirinterested.
Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices
-
partridgegreen
- Posts: 4
- Joined: Tue Mar 15, 2011 12:51 pm
Re: Polishing tips for gel coat?
Hi Billy,
I have used Farecla G3 rubbing compound and was very impressed as it really brought the dull gel coat to life. It is best to use the machine as the finish is much better than by hand.
Most chandlers sell the product but it is very expensive and you can normally pick it up much cheaper at an automotive retailer or online.
After using the compound I wax using MER car polish (bought from halfords etc.) and the overall result has been fantastic.
Cheers,
Joe
I have used Farecla G3 rubbing compound and was very impressed as it really brought the dull gel coat to life. It is best to use the machine as the finish is much better than by hand.
Most chandlers sell the product but it is very expensive and you can normally pick it up much cheaper at an automotive retailer or online.
After using the compound I wax using MER car polish (bought from halfords etc.) and the overall result has been fantastic.
Cheers,
Joe
-
Coddy
- Posts: 96
- Joined: Thu Sep 01, 2011 3:51 pm
- Location: Dorset
Re: Polishing tips for gel coat?
Hi
When using G3 you MUST use it with a damp/wet sponge disc otherwise you will damage the gel coat as it overheats.
Messy job but works wonders on dull GRP
Dave

When using G3 you MUST use it with a damp/wet sponge disc otherwise you will damage the gel coat as it overheats.
Messy job but works wonders on dull GRP
Dave