Shetland 460

Thoughts, Ideas and General Questions
markle
Posts: 30
Joined: Sun Apr 22, 2012 9:08 pm

Shetland 460

Post by markle »

Hi All

Thought I would do a newbie intro post!

I have a Shetland 460 which I have owned for a while, use it for bassing, find the hull to be one of the best boats I have owned for the rough stuff and it is super solid.

Anyway .....

I had a bit of an issue with water in the foam so cut the deck and foam out with the hope of making a living bilge. Turns out the foam wasnt as wet as I thought but following through with a complete rebuild pretty much (minus the foam).

The aim is to produce a fast fisher with a nice draining deckspace.

I will upload some pics of the project when I can.

So far have some ribs and bits glassed in, deck cut from 18mm marine ply and most of the gelcoat filled where needed (topside) the hull can wait!

I have also filled in the miriad of old holes in the transom with resin soaked dowl, and will be filling the ends.

Which would bring me to my first question, anyonw know where I can get the pigment for the tourquise (SP!) hull of the 460?

Looking forward to being an active member, cost me a fiver so better make full use!!!

All the best

Mark
markle
Posts: 30
Joined: Sun Apr 22, 2012 9:08 pm

Re: Shetland 460

Post by markle »

Well that was a fiver well spent, friendly bunch you fellow shetland owners!
Neily
Posts: 84
Joined: Thu Mar 17, 2011 11:03 pm
Location: Shetland Black Hawk No.520 - on Loch Awe - Mercury 75

Re: Shetland 460

Post by Neily »

Lol, don't take it personally Mark. It's just not the busiest of forums unfortunately.
Image
Shetland Black Hawk No.520
markle
Posts: 30
Joined: Sun Apr 22, 2012 9:08 pm

Re: Shetland 460

Post by markle »

ha ha no worries Neil

plan has changed and i will now be putting foam back under the new deck

dont suppose you have any idea on a colour match for the hull?
Neily
Posts: 84
Joined: Thu Mar 17, 2011 11:03 pm
Location: Shetland Black Hawk No.520 - on Loch Awe - Mercury 75

Re: Shetland 460

Post by Neily »

Maybe worth giving these guys a call Mark: http://www.ecfibreglasssupplies.co.uk/c ... ments.aspx
Image
Shetland Black Hawk No.520