Hi everyone, after twelve months of lurking i thought i would introduce myself. Im new to this boating m'larky, but after a weeks hire of an Elysian 27 on the broads from Whispering reeds boatyard in 2010 (great service,highly recommended) i fell in love with the idea of owning my own river cruiser.So after a while of poking about on the net,i decided on a Shetland 535 or a 570,as these im told ,make great starter/learner boats.
By may 2011i had found a boat to suit my budget, bought a suitable trailer and was on my way down to Christchurch to pick her up off a lovely chap called Brian,who took me out with my wife for a little demo ride.The deal was soon done,and after giving Brian the dosh, i set about taking her off her mooring and retrieving her to the trailer. I was a little apprehensive about this,due to me not being used to the boat having only moved it 100 yards,and no prior experience,but unbelieveably she was soon up on the roller trailer,with no hiccups ,strapped down and the wife and i were on our way back to darkest Wiltshire.
My 570 is named Capricorn ,and is boat number 691. She has a Mariner 40hp 2 stroke twin,with hydraulic trim,that runs sweetly and pumps water strongly,altho i will give the engine a complete service before she goes back in the water.(By trade i am a motorcycle mechanic/engineer/shop owner.)
The bad bits are really all cosmetic,as she had a leaky roof and the interior will need a complete re-fit.Over the summer of 2011 she recieved a complete re-spray. She was already painted ,and the paint work was a little flaky here and there. Pictures to follow, thats it for now...
All the best
Paul
Hello all,from another new member.
-
ppowder
- Posts: 9
- Joined: Sat Jun 04, 2011 10:02 am
- Location: Wiltshire
-
colinpearce
- Posts: 76
- Joined: Tue Mar 15, 2011 12:28 pm
- Location: Yala, Black Hawk, Honda 90HP, Trailered Anglesey
Re: Hello all,from another new member.
Hi Paul
Welcome, don't worry about the cosmetics they can soon be put right with a bit of love care and money of course. Our boat was a shed when we bought it but a winters hard work saw it looking pretty good. That was three years ago but this spring we are in the process of finishing off the cockpit, new seats, carpets, linings, well everything really, now just looking forward to having a relaxing summer
Welcome, don't worry about the cosmetics they can soon be put right with a bit of love care and money of course. Our boat was a shed when we bought it but a winters hard work saw it looking pretty good. That was three years ago but this spring we are in the process of finishing off the cockpit, new seats, carpets, linings, well everything really, now just looking forward to having a relaxing summer
Our boat Yala
viewtopic.php?f=9&t=98&p=2186#p2186
viewtopic.php?f=9&t=98&p=2186#p2186
-
moiboidan
- Posts: 138
- Joined: Tue Mar 15, 2011 8:26 am
- Location: shetland 570 shoreham/brighton, sussex
Re: Hello all,from another new member.
hi mate, welcome from another south coast 570 owner, mine was the same as colins, a shed that leaked, an engine that was seized, just takes time and loads and loads of money. imsure ive seen a 570 called capricorn on the internet, got any pics. cheers, alan
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: Hello all,from another new member.
Welcome. I am also a South Coast 570 owner. Ours has been an ongoing "project" for 6 years. But well worth it.
we often get together here and our next meet is over the Whit Bank Holiday weekend. Please join us even if it is by land. All welcome . Just let me know
we often get together here and our next meet is over the Whit Bank Holiday weekend. Please join us even if it is by land. All welcome . Just let me know
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
ppowder
- Posts: 9
- Joined: Sat Jun 04, 2011 10:02 am
- Location: Wiltshire
Re: Hello all,from another new member.
Thanks guys,im waiting for a gap in the rain and i will take a few snaps and post them up.It seems clear that every little job you undertake un earths a heap of potential problems and extra work,along with another dig into the wallet! Even so, i quite enjoy the work.
I have refitted all the windows in the cabin, along with the roof rails, and re-sealed the houdini hatch, and it appears the cabin is now water tight and i have no leaks or drips.My next job as the fabrication of a new windscreen complete,as i think £500 is way over the top for a genuine replacement. My existing screen is a bodge constructed from a mix of timber and UPVC
Im trawling the gallery for decent images of the frameworks composition, and wondering if i should go polished alloy ,or stainless steel. I see some people have made modifications to allow thier sceens to fold down to allow passage under low bridges etc, im interested to see the hinge arrangement on a setup like this.
Right,wheres that steel ruler
Paul
I have refitted all the windows in the cabin, along with the roof rails, and re-sealed the houdini hatch, and it appears the cabin is now water tight and i have no leaks or drips.My next job as the fabrication of a new windscreen complete,as i think £500 is way over the top for a genuine replacement. My existing screen is a bodge constructed from a mix of timber and UPVC
Im trawling the gallery for decent images of the frameworks composition, and wondering if i should go polished alloy ,or stainless steel. I see some people have made modifications to allow thier sceens to fold down to allow passage under low bridges etc, im interested to see the hinge arrangement on a setup like this.
Right,wheres that steel ruler
Paul
-
deeandmartin
- Posts: 99
- Joined: Sat Feb 26, 2011 12:42 pm
- Location: No boat at present based in Mid Wales
Re: Hello all,from another new member.
Welcome to the site and Shetlands.... We started with a 535 in 2008 spent 2 years doing her up and decided to move on to a 570. The boat hull itself was in really good condition but internally needed some serious attention, we started working on her on the drive in March 2011 and within 2 hours there was more of the internal part of the boat on the drive than there was on the boat!!
We had literally stripped back to the fibreglass, there were no seats or lockers, no helm seat, nothing!!! We decided to change her colours from burgundy to navy so new decals were put on...... the worst job ever was getting the old ones off, none of the tried and tested methods worked for us!!! New lockers were made using some of the templates of what was removed, and adding raised side panels to act as small headboards when laying or sitting on the cabin cushions, the original seat boards were cleaned and varnished, I had foam cut to size and made fabric cushions for the cabin and vinyl cushions for the cockpit. Car lining carpet was used to line the sides and floor areas of the cabin and cockpit. We wanted a pedestal helm seat so fibreglassed a circular wooden base to the deck, bolting through a matching circular varnished base on top and the pedestal to that. We recovered the cockpit side panels, the sink had previously been on the starboard side so we moved it to the port side in the cabin, the original sink was missing and a small stainless steel catering sink was purchased along with a lever pump tap. On the starboard side we made a "piano" hinged locker for storing the porta loo which also allows it to be used privately in the day in the cabin if necessary when on the water. The original square toilet locker is now a shoe locker!! all that was last year, we called a halt so we could at least get some use out of her.
This year... after struggling with the 40hp 2 stroke last year, we have bit the bullet and purchased a nice Mariner 100hp 4 stroke (yet to be tried out), there were no navionics on the boat so an Advansea combo unit has been fitted, Advansea VHF radio, compass, external waterproof socket in the cockpit for the coolbox fridge and also for the trickle charger for the engine etc., for when we are moored on shore power. The stern nav light assembly was missing so we have had to replace that, there were no electrics so this has all been added and fed through a loom with a central waterproof panel in the cockpit. Pictures have been taken all along the way pictures of the early work are already on the gallery section, more to follow and will be added to Golden Days 570, the work still continues!!!! Good luck to all it is an addictive hobby!!! Dee and Martin PS best thing we ever did was join the SOA flotilla on the Solent in 2008..... well worth coming along to
This year... after struggling with the 40hp 2 stroke last year, we have bit the bullet and purchased a nice Mariner 100hp 4 stroke (yet to be tried out), there were no navionics on the boat so an Advansea combo unit has been fitted, Advansea VHF radio, compass, external waterproof socket in the cockpit for the coolbox fridge and also for the trickle charger for the engine etc., for when we are moored on shore power. The stern nav light assembly was missing so we have had to replace that, there were no electrics so this has all been added and fed through a loom with a central waterproof panel in the cockpit. Pictures have been taken all along the way pictures of the early work are already on the gallery section, more to follow and will be added to Golden Days 570, the work still continues!!!! Good luck to all it is an addictive hobby!!! Dee and Martin PS best thing we ever did was join the SOA flotilla on the Solent in 2008..... well worth coming along to
-
ppowder
- Posts: 9
- Joined: Sat Jun 04, 2011 10:02 am
- Location: Wiltshire
Re: Hello all,from another new member.
Thanks again everyone for the warm welcome, i can see this site will be an invaluable asset to completing the restoration of this boat. I intend to keep it at Lechlade/Radcott on the Thames when its completed,as its local for me,and possibly trailer it up to the broads for the odd week over the warmer months. Im not quite sure how long this project will take,but im in no hurry,and would rather it was done properly first time. Im getting to the stage where i need to sort out a pram canopy to keep everything nice and dry in the cockpit, as it has a tonneau type cover that has seen better days now,with the odd little leak here and there. Nauticover seem to be held in very high regard by the site users here,and the pricing seems sensible.
Thanks again
Paul
Thanks again
Paul
-
deeandmartin
- Posts: 99
- Joined: Sat Feb 26, 2011 12:42 pm
- Location: No boat at present based in Mid Wales
Re: Hello all,from another new member.
Can recommend Nauticover, Phil and his team have been brilliant in doing work for our 535 and the 570, always helpful, great customer service and quality. All the best Dee
-
strander
- Posts: 2
- Joined: Thu Apr 24, 2014 9:43 pm
- Location: Limerick, Ireland
Re: Hello all,from another new member.
I joined the forum in 2014 while I was looking for a Shetland, and last summer I bought one. A really lovely 2004 Family Four in great condition. I live in Ireland so I trailered it over here on the ferry, and used it in last summer on the lower River Shannon, based mostly around Lough Derg and down to Limerick city.
What a great little boat! I replaced the 15hp Yamaha with a new 40hp to deal with the times that the hydroelectric dam at Ardnacrusha is running on 3, or even 4, of its 20 MW turbines - going upstream against that in Limerick city can be fun
I grew up on boats - dinghies and later when my Dad bought a 18ft sailing cruiser. I loved sailing, especially on dinghies and windsurfers, but now that I've somehow reached my late 50s, I feel that a drier, more refined day out is more enjoyable. The kids are almost reared (I hope) and I can now do something I enjoy, so back onto the water for me after a 30 year break. The Shannon is a great spot - well recommended to any UK friends and visitors.
Nice to be here & looking forward to using the forum.
What a great little boat! I replaced the 15hp Yamaha with a new 40hp to deal with the times that the hydroelectric dam at Ardnacrusha is running on 3, or even 4, of its 20 MW turbines - going upstream against that in Limerick city can be fun
I grew up on boats - dinghies and later when my Dad bought a 18ft sailing cruiser. I loved sailing, especially on dinghies and windsurfers, but now that I've somehow reached my late 50s, I feel that a drier, more refined day out is more enjoyable. The kids are almost reared (I hope) and I can now do something I enjoy, so back onto the water for me after a 30 year break. The Shannon is a great spot - well recommended to any UK friends and visitors.
Nice to be here & looking forward to using the forum.