how should my speed log be connected?

Thoughts, Ideas and General Questions
pcejce
Posts: 4
Joined: Wed May 09, 2012 10:18 am
Location: wareham dorset

how should my speed log be connected?

Post by pcejce »

I recently purchased a Shetland 500 and found that all the power connections to the meters had been removed, does anyone know how to connect a 'yazaki' speed log ? the 3 connector plug from the transducer has blue/black and red wires and plugs into the meter, but there is no power connected... is there a way of testing the meter and or transducer to see if they work ?I would appreciate some advice. I believe the 'Yazaki' meter was the original speed log installed when boat new so some owner out there probably still has one, any chance of checking how yours is wired/connected for me ? Thanks in anticipation
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: how should my speed log be connected?

Post by daveinglasgow »

Hi

most transducers take the power from the unit and dont have their own power source so what you should have is a cable from the meter to the switch panal and most of these only fit 1 model of 1 make of unit. So if this is missing you will have a v hard job finding a power cable :( sorry.

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
pcejce
Posts: 4
Joined: Wed May 09, 2012 10:18 am
Location: wareham dorset

Re: how should my speed log be connected?

Post by pcejce »

Dave... thanks for your reply it's :D pleasing that I've had a reply even if it hasn't solved my problem, unfortunately one of the previous owners has removed all the wires from the switch panel with the exception of the the main +ve & -ve from the battery and the connections to the nav lights, re the log, the cable from the transducer is currently the only connection to the log meter. Oh well perhaps someone else will have some ideas, as I said if there is a way of testing the meter or transducer with a DVM then I'd know whether I'm wasting my time.
Thanks again ! :!:
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: how should my speed log be connected?

Post by daveinglasgow »

http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices