Well,
Just missed out on a Blackhawk that I had decided to go for.
However, I was just at the point of researching and trying to decide on what boat to go for.
I am looking for a sea going boat for fishing / pleasure cruising / pulling a ring for the kids eventually.
I'd like a decent cabin with seating / sink / stove ideally.
I'd narrowed it down to a 570 / Blackhawk / Saker.
Any advice on these and other options? I've seen a Kestrel advertised in Ireland but everywhere else seems to pitch the Kestrel as an inland cruiser.
Was looking at picking something up with trailer and something like a 90HP 4 stroke. Would that be enough engine for these boats?
Any pointers would be welcomed as I am new to this boating malarky.
Gaz
Looking for a Shetland - Advice please
-
GAZXB9R
- Posts: 9
- Joined: Tue Aug 21, 2012 6:22 pm
- Location: Stonehaven, Scotland
-
suewright
- Posts: 77
- Joined: Wed Feb 23, 2011 4:33 pm
- Yahoo Messenger: Shetland 4+2
- Location: TWO CAN Shetland 4+2 Hamble, Hampshire
Re: Looking for a Shetland - Advice please
The kestrel is the updated model of the 570. We have a 570 with 75 horses on the back. We live in the Solent area and think nothing of going to Cowes for lunch or tearing down to lymington We also spend most of the summer pottering around inland. We are exploring the River Avon thus year So, the 570/ Kestrel is amply suitable for both areas.
-
suewright
- Posts: 77
- Joined: Wed Feb 23, 2011 4:33 pm
- Yahoo Messenger: Shetland 4+2
- Location: TWO CAN Shetland 4+2 Hamble, Hampshire
Re: Looking for a Shetland - Advice please
Our friends have a 100 hp on the back if their 570.
-
GAZXB9R
- Posts: 9
- Joined: Tue Aug 21, 2012 6:22 pm
- Location: Stonehaven, Scotland
Re: Looking for a Shetland - Advice please
Thanks for that.
It would be nice if the https://secure.shetlandboats.co.uk/ website had chronological history.
I've now had an advert for a 610 catch my eye.
She has a 120 Evinrude on the back.
Any idea if this would be a 2 or 4 stroke?
Would this be a reasonable size engine for this slightly heavier boat?
Gaz
It would be nice if the https://secure.shetlandboats.co.uk/ website had chronological history.
I've now had an advert for a 610 catch my eye.
She has a 120 Evinrude on the back.
Any idea if this would be a 2 or 4 stroke?
Would this be a reasonable size engine for this slightly heavier boat?
Gaz
-
suewright
- Posts: 77
- Joined: Wed Feb 23, 2011 4:33 pm
- Yahoo Messenger: Shetland 4+2
- Location: TWO CAN Shetland 4+2 Hamble, Hampshire
Re: Looking for a Shetland - Advice please
The above website is not ours so can't comment. The 120 would be a 2 stroke as a4 stroke would be to heavy for the transom
-
GAZXB9R
- Posts: 9
- Joined: Tue Aug 21, 2012 6:22 pm
- Location: Stonehaven, Scotland
Re: Looking for a Shetland - Advice please
Thanks for that.
Any thoughts on how thirsty this 120HP would be pushing a 610?
Any idea as to what weight the transom would take? Or a site that has such spec's?
Any thoughts on how thirsty this 120HP would be pushing a 610?
Any idea as to what weight the transom would take? Or a site that has such spec's?
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: Looking for a Shetland - Advice please
Hi
this will be a 2 stroke as a 4 would be to much for the transom and drink fuel like a thirsty scotsman on a stag weekend! I have a 90hp on mine 4 stroke Honda and that is perfect i.e. 26-28mph fully laden with 2 adults , dog and food for a long weekend.
The 570 / blackhawk etc. are also great boats but dont have as big a cabin but are easier to tow so it comes down to what you want to use it for and where it will be used before we can give better advice. also if you tell us where you are a local forum member will probably help you look at few.
Dave
this will be a 2 stroke as a 4 would be to much for the transom and drink fuel like a thirsty scotsman on a stag weekend! I have a 90hp on mine 4 stroke Honda and that is perfect i.e. 26-28mph fully laden with 2 adults , dog and food for a long weekend.
The 570 / blackhawk etc. are also great boats but dont have as big a cabin but are easier to tow so it comes down to what you want to use it for and where it will be used before we can give better advice. also if you tell us where you are a local forum member will probably help you look at few.
Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices
-
GAZXB9R
- Posts: 9
- Joined: Tue Aug 21, 2012 6:22 pm
- Location: Stonehaven, Scotland
Re: Looking for a Shetland - Advice please
Thanks,
Have moved on from that one.
Updated profile to show my location.
Now looking at a Kestrel and have contacted the owner. Here's hoping it's still available when I get off this rig in 5 days time.
Relatively local.
90 Honda so should be powerful enough and relatively efficient. (Correct me if I'm missing something here)
She's had the gel coat redone in 2011 so that could be a good thing or bad. I didn't want a painted hull though.
Any advice on what I should inspect? My mate that's a marine mechanic has gone abroad unfortunately.
Is there some sort of hatch to access the inside of the hull to look for water damage or indeed hull repairs as the new gel coat may hide this.
If the Hull and engine are ok and the trailer is useable, I think I'll go for it. I like my DIY etc so will no doubt start tweaking and tarting her up straight away anyway.
Gaz
Have moved on from that one.
Updated profile to show my location.
Now looking at a Kestrel and have contacted the owner. Here's hoping it's still available when I get off this rig in 5 days time.
Relatively local.
90 Honda so should be powerful enough and relatively efficient. (Correct me if I'm missing something here)
She's had the gel coat redone in 2011 so that could be a good thing or bad. I didn't want a painted hull though.
Any advice on what I should inspect? My mate that's a marine mechanic has gone abroad unfortunately.
Is there some sort of hatch to access the inside of the hull to look for water damage or indeed hull repairs as the new gel coat may hide this.
If the Hull and engine are ok and the trailer is useable, I think I'll go for it. I like my DIY etc so will no doubt start tweaking and tarting her up straight away anyway.
Gaz
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: Looking for a Shetland - Advice please
Hi
sorry where is this boat based as if it is the one I think it is please call me ASAP before you even look at it.
v v concerned
Dave
0759 563 8185
sorry where is this boat based as if it is the one I think it is please call me ASAP before you even look at it.
v v concerned
Dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices
-
GAZXB9R
- Posts: 9
- Joined: Tue Aug 21, 2012 6:22 pm
- Location: Stonehaven, Scotland
Re: Looking for a Shetland - Advice please
Sorry I didn't get back to you Dave.
Will try and call tomorrow for quick chat but up to my eyes at the moment.
By the way anyone got an answer to the inspection hatches question? Do these boats have them and if so where? So when I go looking I can inspect the inside of the hull properly.
Gaz
Will try and call tomorrow for quick chat but up to my eyes at the moment.
By the way anyone got an answer to the inspection hatches question? Do these boats have them and if so where? So when I go looking I can inspect the inside of the hull properly.
Gaz