Window refurb 640.

Thoughts, Ideas and General Questions
Nick
Posts: 2
Joined: Wed Aug 29, 2012 5:22 pm

Window refurb 640.

Post by Nick »

Hello,
Can anybody give me som assistance on the best way to seal leaking front windows on a 640 (1977)???
Thanks in advance.
suewright
Posts: 77
Joined: Wed Feb 23, 2011 4:33 pm
Yahoo Messenger: Shetland 4+2
Location: TWO CAN Shetland 4+2 Hamble, Hampshire

Re: Window refurb 640.

Post by suewright »

You ned a tube of Captain tolleys Creeping crack cure. Seriously. Excellent stuff. From either online or chandlers
Nick
Posts: 2
Joined: Wed Aug 29, 2012 5:22 pm

Re: Window refurb 640.

Post by Nick »

Sue,
Thank you for your advice, however, I believe the leak is from the deterioration of the seals between the glass and the aluminium frame, and the frame and grp of the cabin. I was hoping to take the frames out but they are fastened by a series of countersunk aluminium rivets/ screws. Do you happen to know if these are screws or rivets, and if so, how are they removed?
Thank you,
Nick.
StevieP
Posts: 41
Joined: Tue Aug 14, 2012 11:59 am
Location: Speedwell, Norfolk 'n' Wey, Oulton Broad, Suffolk

Re: Window refurb 640.

Post by StevieP »

Hi Nick,
sorry to butt in here but i found the best way of removing rivets is to carefully drill the head of the rivet off, as rivets are soft metal this shouldn't be a problem :)
consumedbynature
Posts: 38
Joined: Wed Apr 20, 2011 9:21 am
Location: Billy Keys, Shetland Black Prince, River Avon Worcestershire

Re: Window refurb 640.

Post by consumedbynature »

Hi, I sorted the leaks on the window of my 640 by using Sikaflex 491. It comes in black or white. I used frogtape to give nice clean lines. I also did the same on my black hawk using the black Sikaflex. Type in Shetland black hawk clover in YouTube if you want to see what the sealed windows looked like on my video.

Regards Billy
User avatar
petermarr
Posts: 25
Joined: Tue Mar 15, 2011 1:03 pm

Re: Window refurb 640.

Post by petermarr »

I have a 640 with sliding side windows in aluminium frames, probably a different thing to yours but I have to make sure I clean any mold out of the tracking and drain holes at least twice a year. If they get blocked the rain water builds up and flows inside dripping on to the seat cushions.
Drain holes are easy to clear with a small screwdriver but part of the tracking is hard to get at so a piece of copper earth wire from some twin and earth cable bent into a small hook one end comes in handy.
Pete
Good friends are worth their weight in gold