steering and engine size on a 640

Thoughts, Ideas and General Questions
steveg
Posts: 8
Joined: Tue Mar 15, 2011 9:56 am

steering and engine size on a 640

Post by steveg »

hello .... can anyone advise me please. I have a 640 and would like other 640 owners to tell me how many turns it takes on the wheel to go from lock to lock ... Also whats the view on if they think that a 15hp outboard would be ok for general pottering about the essex creeks

email on; [email protected]

many thanks ... Steve
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: steering and engine size on a 640

Post by daveinglasgow »

Hi Steve

stearing is standard as there are only 2 main makes and at 15hp you dont need to worry about the rating as this changes at 55hp

re the 15hp: yes but needs to be a 4 stroke or it will carb up and be far more trouble than its worth as you will be going 2-5mph. New engines are holding their value very well but most 15's are about the same price as a 20hp i.e. Honda 6 year warranty long shaft with remotes fuel tank etc 15hp RRP 3199 20HP same spec is £3489 so 289 difference RRP gives 25% more HP. we can give you 10% off these prices delivered if you are interested.

Last but not least also consider the Tohatsu as these are the same as mercury/ mariner up to 30hp i.e. just have a different brand name on the hood and the 20 with ES and remotes would come in around 2850 delivered.

Either way stear away from 2 strokes and if buying 2nd hand get them to prove any mad statement i.e. hours when it was last serviced etc.

Dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices