Hi
When fitting my new outboard ( well new to us) we noticed there was expanding foam next to the transum that comes upto just below the bottom engine bolts. There is then a plank of wood and then the normal gap for bilge water.
Should this foam be there?
should the plank be there?
Does the foam soak up water? (we have a 90hp 4 stroke and hence we want no weight at the rear if possible.)
cheers
Dave
Can any 610 owner please help
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
-
logicman1628
- Posts: 1
- Joined: Thu Mar 31, 2011 1:59 am
Re: Can any 610 owner please help
HI Dave,
i'm new to the site but also have a 610. There is no expanding foam on mine. My well is completely made of fibreglass in what seems to be its original state but a previous owner has reinforced the place where the bolts go with a metal plate on either side of transom and the engine bolts go through it. Interested to see pics of yours as im in the middle of building a back bench seat to go over the well. By the way my engine is a 130hp yamaha so is very heavy and still have no problem in our current configuration. hope this helps
Tony
i'm new to the site but also have a 610. There is no expanding foam on mine. My well is completely made of fibreglass in what seems to be its original state but a previous owner has reinforced the place where the bolts go with a metal plate on either side of transom and the engine bolts go through it. Interested to see pics of yours as im in the middle of building a back bench seat to go over the well. By the way my engine is a 130hp yamaha so is very heavy and still have no problem in our current configuration. hope this helps
Tony
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: Can any 610 owner please help
Hi
This is a great help as my thoughts are now remove the foam and have look. I can always put back but it does look out of place.
re the engine:I take it it is a 2 stoke? When we had the daft racing engine on it we noticed that 4 adults in the back would result in water coming in over the transom. I admit the rest of the boat was empty and we are not small people and the cabin was empty but even so this was not good.
also did you know your engine is to big for the boat and over the spec limit so insurance will be v hard to get or invalid if you don't declare this. Sorry I don't want to scare you but there have been a few people on this site who have been caught out with engines that are 2 big.
Thanks again for your help
Dave
ps
Have a look at http://www.youtube.com/results?search_q ... +test&aq=f

This is a great help as my thoughts are now remove the foam and have look. I can always put back but it does look out of place.
re the engine:I take it it is a 2 stoke? When we had the daft racing engine on it we noticed that 4 adults in the back would result in water coming in over the transom. I admit the rest of the boat was empty and we are not small people and the cabin was empty but even so this was not good.
also did you know your engine is to big for the boat and over the spec limit so insurance will be v hard to get or invalid if you don't declare this. Sorry I don't want to scare you but there have been a few people on this site who have been caught out with engines that are 2 big.
Thanks again for your help
Dave
ps
Have a look at http://www.youtube.com/results?search_q ... +test&aq=f