Shetland 610 cruiser

Thoughts, Ideas and General Questions
Tyke
Posts: 1
Joined: Thu Jan 10, 2013 1:47 pm

Shetland 610 cruiser

Post by Tyke »

Hya Folks just joined your forum and did it for a reason. I'm in danger of becoming the owner of a Shetland 610. Trouble is That info about them is as scarce as rocking horse manure . Even on here I can only find a handfull of postings. The one I'm looking at needs some work and I only want it for river cruising. My racing days are long gone. So could anyone tell me the pro's and con's of the 610 or is someone renovating one would be good. To be honest I dont have a clue about Shetlands, never had one before but the 610 sits nice in the water. Any help or advice would be warmly welcomed, Thanks Regards Tyke
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: Shetland 610 cruiser

Post by admin »

Hello and welcome. We have several 610 owners here. I will udge them and see if they can help

sue-ADMIN
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Shetland 610 cruiser

Post by daveinglasgow »

built v v well, cruise at 16-30 with a normal engine or 56+ if you put an XR" racing engine on it (v v stupid but type ion shetland 610 speed test for the videos on you tube) lots of room , are light at the front , can be towed by a normal family car i.e.madzda 6

oh and cheap!


Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
partridgegreen
Posts: 4
Joined: Tue Mar 15, 2011 12:51 pm

Re: Shetland 610 cruiser

Post by partridgegreen »

Hi Tyke,

I don't post on this forum very often so you may (or may not) already be a 610 owner.

As Dave has already mentioned they are well built boats with plenty of room inside and trailable if you want.

We bought ours in 2007 as a bit of a project although the structure was good and used a local boat yard to stip it back to gel coat, replace windows, headlining and generally get back to original(ish) condition. We then did all the easy work so new hob, loo, cushions, carpets, fuel tanks etc. Ours had a 60HP mercury outboard (about 8 years old at the time) which we used in Chichester harbour but I felt was a little underpowered for sea work. Top end was under 10 knots so ideally suited for river.

The reason we went for a 610 was mainly for the accommodation that it offered which was enough for 3 of us (including young son) and would allow for overnight stays in relative comfort. In the end, I sold her as I wanted more speed!

I've probably got some photo's so let me know if these would help.

Cheers,

Joe