Engine size for a 535

Thoughts, Ideas and General Questions
RobGilmour
Posts: 4
Joined: Fri Jan 18, 2013 5:49 pm

Engine size for a 535

Post by RobGilmour »

Hi all, I'm new to the site and would like a bit of guidance please, I've owned my 535 for 8yrs and the engine was a 75hp two stroke Johnson, this engine appears to have given up the ghost, so I'm thinking of replacing it with a new four stroke, the boat is used for sea fishing/camping so I need an engine to push the boat at around 25 knots which the old engine did, my concern is the differance in weight between two and four strokes, I'm thinking 60hp but would like some advice please..

Cheers Rob..
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: Engine size for a 535

Post by admin »

Hello and welcome I will get Dave our resident engine guru to give you some advice.

Sue ADMIN
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Engine size for a 535

Post by daveinglasgow »

Hi

re speed and engine

a 60 would be fine as you will not be in high revs at the speed you are looking for and if its a Honda you will be well within eco mode i.e. you will burn even less fuel. Now the big choice is new or 2nd hand. If new I would either keep the engine for 4.5 years or 5.5 if the honda as that way it will have warranty left and like cars the soon as that runs out they take a big hit so its either that length of time or 7-10 years to get the best value out of your engine.

2nd hand. there is lots of rubbish out there and yam and honda can often be ex commercial so ask for a print out of the hours if private and you must see it pushing a boat and not just hear it running. There is a how to guide on our website for this that could also be worth a look.

You will also need a back up engine and unless you are in the solent then look at the 2.3 honda or 3.5 tohatsu ( same as mercury and mariner and all made by nissan) both of these will push a 570 at 3-4mph so will be fine but the 3.5 will come in at 18kg and the honda at 13kg so this will depend on what you are happy moving around on a boat at sea.

you also dont say what is wrong with your current engine? if it has good compression and a gear box then I would be tempted to repair and turn the VRO off if you have it on your model as you dont specify which one you have sorry.

Feel free to call

Dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Engine size for a 535

Post by daveinglasgow »

Hi

re speed and engine

a 60 would be fine as you will not be in high revs at the speed you are looking for and if its a Honda you will be well within eco mode i.e. you will burn even less fuel. Now the big choice is new or 2nd hand. If new I would either keep the engine for 4.5 years or 5.5 if the honda as that way it will have warranty left and like cars the soon as that runs out they take a big hit so its either that length of time or 7-10 years to get the best value out of your engine.

2nd hand. there is lots of rubbish out there and yam and honda can often be ex commercial so ask for a print out of the hours if private and you must see it pushing a boat and not just hear it running. There is a how to guide on our website for this that could also be worth a look.

You will also need a back up engine and unless you are in the solent then look at the 2.3 honda or 3.5 tohatsu ( same as mercury and mariner and all made by nissan) both of these will push a 570 at 3-4mph so will be fine but the 3.5 will come in at 18kg and the honda at 13kg so this will depend on what you are happy moving around on a boat at sea.

you also dont say what is wrong with your current engine? if it has good compression and a gear box then I would be tempted to repair and turn the VRO off if you have it on your model as you dont specify which one you have sorry.

Feel free to call

Dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
RobGilmour
Posts: 4
Joined: Fri Jan 18, 2013 5:49 pm

Re: Engine size for a 535

Post by RobGilmour »

Thanks for the info Dave, firstly the 75 hp Johnson i have is a 1979 model (not vro), I struggled to get parts for it, plus last year it let me down twice so i've got a lack of confidence in it (first time coil, second time starter motor), as for compression i've not actually measured it but i can turn the fly wheel by hand so i think the compression is down, I think the current problem is fuel related possibly due to compression. Plus it would be nice to have PTT instead of running to pull the present engine up

I'm fishing the Irish Sea off Walney, Millom and Morcambe bay so the tide is quite fast (especially morcambe bay low water up) so i've been looking at a 6-8 hp back up, plus this would be kept in the cabin and would work as a bit of a counter balance i think to get the boat planing sooner, when i've got 3 adults in it used to take a bit to get the bow down.

Finally which engine, i've got every make of engine covered with the friends, boat clubs and fishing clubs that i'm in, which has led to me being more confused because they all say that theirs is the best, personally i've always liked Mariner so i would be looking at the 60hp EFI four stroke but the majority say Honda, Yamaha or Suzuki in that order, i'm hoping to keep which ever engine i get for 10 years + if all goes well. Have you got any views on engine choice Dave?? Just an after thought does anyone know what the E-TEC engines are like??

Cheers Rob..
User avatar
Coddy
Posts: 96
Joined: Thu Sep 01, 2011 3:51 pm
Location: Dorset

Re: Engine size for a 535

Post by Coddy »

Hi Rob

We recently had a talk by the marine police and how to help prevent equipment from being stolen.
Seems the most common engine to be stolen is the Yamaha then Honda and then Suzuki, most of these are stolen to order and shipped abroad. In one marina near here had 7 engines stolen in one night! All 50hp and bigger. Do make sure you get a DNA marking kit, about £30, and mark up various bits on the engine to prove it is yours, take photo's and keep the engine details on file just in case you need them.

Re Etec's, Dave in Glasgow and I have a differance of opinion regarding these engines. Yes they are two-stroke and normally lighter in weight than the majority of 4-strokes. Some of my fellow club members and friends have Etec engines and have not had any problems with them. They all use the recommended oil whilst it is a bit more expensive the engine does use less of it. They also do not need servicing for 3 years or 300 hours, try adding the cost up of servicing a 4-stroke engine from new. They even produce a multi-fuel engine, 55HP, which you can switch with a flick of a switch! You do need a proper experianced dealer to work on these engines as they need to be set up correctly and have the correct diagonstic equipment to read from the engines management system.

Personaly, I would choose a make that has dealer local to you with a GOOD reputation so should a problem occur you wont have to go far to get it fixed or serviced.
I am personaly not a fan of Mariner or Mercury as I think they are a bit like Fords, cheap and cherfull but then I did have a bad experiance with a Mariner 60hp 4-stroke and I did not think that is was that economical or quite and cost a fourtune to fix each time.

Do be aware of the max engine output rating of the 535 which if I recall is 65hp, if you go above this your insurance may well not pay out should you have an incident or problem with the boat unless they agree to cover you!

Dave
8-)
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Engine size for a 535

Post by daveinglasgow »

Hi

Based on your requirements this is not a debate about 4 or 2 stroke engines as you are looking for reliability and low fuel consumption and you want to keep it for 10 years.

yam and Honda own the commercial market with yam being the bigger of the two but Honda,s share is growing but in fairness they are a bit cheaper and have a longer warranty at the time of writing this as yam will respond and then honda will respond to yam etc.

Mercury/ mariner are the next biggest based on new engines sales i.e. excluding boat packages. They are also the same as Tohatsu if under 30hp.

Suzuki engines are growing in reputation but we do not see enough to give real advice on these sorry.

The other makes are only a small percentage of the market with some not even having a uk office i.e hidea , Evinrude etc.

So i would get a few yam quotes for your main engine and I can tell you my buy price on the honda, Tohatsu ( for your aux and the same as mercury and mariner) and soon.......

oh if you are a "competent mechanic the above advice will be narrowed down further. ;)

dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
RobGilmour
Posts: 4
Joined: Fri Jan 18, 2013 5:49 pm

Re: Engine size for a 535

Post by RobGilmour »

Thanks for the advice guys, the Yamaha is beating the Honda by a nose and they're right on my doorstep so i'll get some quotes this weekend hopefully, but in the mean time a friend of a friend wants to have a look at my Johnson (reckons they're bullet proof) so i'll let him have a look as a possible fix for a future part exchange against one of the above...I got in touch with an e-tec dealer and he wouldn't give me a quote for an engine unless i could prove that i could transport my boat to him for fitting, which in this case was Portsmouth so i'll be giving that a miss, although i understand that they have to set the engine up i still thought they would have given me a price quote??
Thanks for the security advice i will discuss the data tagging when i enquire about the engines...

Thanks again,
Rob..
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: Engine size for a 535

Post by admin »

If you DO need to come to Portsmouth - I do a great bed and breakfast

Image
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
RobGilmour
Posts: 4
Joined: Fri Jan 18, 2013 5:49 pm

Re: Engine size for a 535

Post by RobGilmour »

Haha i'll bare that in mind, have you got shares in e-tec lol...

Cheers Rob... :D