535 window seals

Thoughts, Ideas and General Questions
rbro1979
Posts: 7
Joined: Thu Jun 07, 2012 8:04 pm
Location: Finstown, Orkney

535 window seals

Post by rbro1979 »

Hi Folks,

I bought an old 535 last year (short shaft transom, although it's been raised at some some point to fit long shaft) which we pottered around on for the summer. I'd like to give her a scrub up before use this year to go island hopping. I'd hoped to take the windows out to properly paint the cabin and tint the windows (also having new tonnaue cover made, rub strip and seating). It came with a canopy but a bit tatty so I've taken it off.


Windows
The seals on the windows are in good condition (original, I think). Is this a daft idea? Would I be best to cover the windows and paint around and tint with windows in? or is it not to big a job to remove and refit the windows? Am I going to create problems which currently don't exist?

Also, can I reuse the rubber window seals once I've taken them out?

Cheers guys, lovin' all the advice and help I've read.

Russ
User avatar
Coddy
Posts: 96
Joined: Thu Sep 01, 2011 3:51 pm
Location: Dorset

Re: 535 window seals

Post by Coddy »

Hi Russ

If when you say you want to go Island hopping, do you mean by sea?

If so, I would strongly recommend that you replace the front windows and seals and get slightly over large ones made up and then bolt them into place sitting on a bed of stikaflex.

If you have a wall of water come over the bow, it could easily push the windows in and flood the cabin.

If you are inland waterways then ignore the above.

Ref painting, I would leave the windows and seals in place and mask around them as they can be a pain to refit.

Dave
8-)
Paulsjenny
Posts: 92
Joined: Wed Dec 26, 2012 7:55 am
Location: Bristol

Re: 535 window seals

Post by Paulsjenny »

I f you don't half to then leave the windows in , I removed mine and it took ages to get them back in :cry: I had to buy a tool to get them in with , it's a real pain in the whatsit!
rbro1979
Posts: 7
Joined: Thu Jun 07, 2012 8:04 pm
Location: Finstown, Orkney

Re: 535 window seals

Post by rbro1979 »

Hi Guys,

Thanks for response. I live in Orkney, lots of small beaches and islands on doorstep.

Often take the kids to beach/island to camp for the night. The ones we go to are never far from home and during real calm weather. Thanks for advice though.


Cheers

Russ
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: 535 window seals

Post by admin »

I have just said the same in another post. think very carefully before bolting windows in. It will seriously devalue your boat and is a very expensive way of doing it. Marine grade SS nuts and bolts are mega not cheap.We had a Small Dijon many moons ago and it had bolted in windows. The bloody things leaked despite seals and sealant and rattled like the devil at open throttle.. Nightmare never again
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
User avatar
Coddy
Posts: 96
Joined: Thu Sep 01, 2011 3:51 pm
Location: Dorset

Re: 535 window seals

Post by Coddy »

Hi Sue

I have never had the problem of leaking or rattles, however I never used s/s bolts but the plastic number plate bolts which are cheap and easily replaced if needed.

Dave
8-)
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: 535 window seals

Post by daveinglasgow »

Hi

sorry i do need to ask a few questions here

1: when the boats are built they are not built with bolted windows and still manage to get cat c badge so why do it. Oh and I have hit many a big wave and I have never had the windows push in and flood the cabin. Further more, if this was the case they would not get a cat c rating so clearly the government agencies does not think this is a problem either.
2: Doing this devalues the boat so again why do it?
3: It never looks as good as ones with windows that are inserted

based on the above i would never reccomend bolting over sized windows to you boat as all you will do is devalue it and make it look less nice than shetland made it by having them fixed in with beading. and I guarantee there is no risk of you flooding the cabin if you hit a big wave.

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
guest

Re: 535 window seals

Post by guest »

Some Shetlands did have bolted on windows as standard, so they can't be all bad! With black nylon bolts and black sealant, they look great.