repair to hull sealark

Thoughts, Ideas and General Questions
sealark
Posts: 4
Joined: Tue Apr 16, 2013 10:14 am

repair to hull sealark

Post by sealark »

Hi

I have a small hole, more of a puncture in the hull on the v, it's as big as my finger nail, also on the bottom its been scraped on the v about 4 inches long so it's down to the fibreglass. on this bit it's wet and has a drip there which i wipe away but it comes back..... helpppppppppppppp......
The puncture on the hull is dry but cant work out why approx 12 inches away where the scrape is it's wet, obviously there must be some water in there.
Any advice on where to start? and what to do? please

Tracey :cry:
User avatar
davidemania
Posts: 95
Joined: Tue Mar 05, 2013 6:15 pm
Location: Monfalcone, eastern north Italy

Re: repair to hull sealark

Post by davidemania »

A hole on the hull large as a fingernail? This does not seem so small to me, it could easily sink a boat (weren't she filled with foam to keep her up). It is hard to tell what could be done without seeing at least a picture, I believe you could get much more help posting one or two images of the damaged part.

From what you say it could well be that the foam absorbed a lot of water (ok it is closed cell and it shouldn't, but the reality is different) and now it is dripping. Being this the case a cure could be to drill a few holes on the bottom, then apply a plastic sheet with sealing tape at the edges and attach it to a vacuum pump and leave it there for a few days. It may work or not, depending on your hole being the only ones (if there is another way air can enter in the sandwich of the hull this won't work, or work less effectively). Anyway it is not an easy job if you don't have someone with the proper skill assisting you (or doing it!)

ciao
Davide
karl1963

Re: repair to hull sealark

Post by karl1963 »

You dont say where you are but if you need a hand im in devon , ive some experiance with grp and epoxy , ive just repaired a 460 hull with a whole in big enough to put your head in ! Im having some trouble logging in at the moment so signed in as a guest . My username is karlhibbert if you can find my contact details on the members list . Karl