Hi all, Im looking for a long lasting exterior varnish I used Epifanes clear last year and found that it has cracked & peeled already.
Any advice would be magic
Thanks
Steve
TOMARROW The sun will rise & the sun will set, The rest is up to YOU
Owner of a Shetland 25 Inlander "April Dream "
1. Always follow the instructions on the tin.
2. Dilute the first coat to aid penetration (see the tin).
3. Always sand with the grain.
4. Sand with fine wet and dry between coats.
5. About 5 to 6 coats should give a good finish.
6 Follow instruction 1.
You can get 2 pack varnish that sets to a hard finish that can be burnished, it lasts for years if you follow the instructions.