Shetland 535 anchor
-
sniffyterrence
- Posts: 29
- Joined: Thu Apr 07, 2011 12:38 pm
Shetland 535 anchor
Hi all what size and type of anchor would I need for my 535 suntrip for the river Trent non tidal 9-15 ft deep don't know what the bottom is made of would guess mixture clay and weed some rocks. Thanks
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: Shetland 535 anchor
Most of the Trent is clay/mud. As you have no real tidal shift or current, my guess is a grapple with warp and chain
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: Shetland 535 anchor
About 8- 10 kg
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
Coddy
- Posts: 96
- Joined: Thu Sep 01, 2011 3:51 pm
- Location: Dorset
Re: Shetland 535 anchor
I use a 4kg Delta anchor on my 535 but that is for sea work.
I would have thought something similar in a 5kg Bruce design as there are less chances of fingers getting caught in other types. They are also are quite compact.
If it is for a perminant mooring then a more substantial weight and chain will be required.
Dave
I would have thought something similar in a 5kg Bruce design as there are less chances of fingers getting caught in other types. They are also are quite compact.
If it is for a perminant mooring then a more substantial weight and chain will be required.
Dave
-
sniffyterrence
- Posts: 29
- Joined: Thu Apr 07, 2011 12:38 pm
Re: Shetland 535 anchor
Thanks for your help what size and length of chain and rope would be required for this boat with a 7.5 kg anchor
-
Coddy
- Posts: 96
- Joined: Thu Sep 01, 2011 3:51 pm
- Location: Dorset
Re: Shetland 535 anchor
I would suggest 12mm rope as it is easier on the hands when pulling the rope in, anything smaller can be painful, chain I would suggest 6mm.
For inland use only, I would have thought 30 - 50mtrs of rope and 1/2 to full boat length of chain would suffice.
It is better to have too much rope than not enough and it could also be used as a tow rope if you breakdown or want to tow someone else.
DAve
For inland use only, I would have thought 30 - 50mtrs of rope and 1/2 to full boat length of chain would suffice.
It is better to have too much rope than not enough and it could also be used as a tow rope if you breakdown or want to tow someone else.
DAve
-
sniffyterrence
- Posts: 29
- Joined: Thu Apr 07, 2011 12:38 pm
Re: Shetland 535 anchor
Thanks Coddy
Just the advice I was looking for
Just the advice I was looking for