Newbie Saying Hi!

Thoughts, Ideas and General Questions
digga
Posts: 14
Joined: Sat Sep 07, 2013 9:56 pm

Newbie Saying Hi!

Post by digga »

Hi all, newbie here :)

i am hoping to look at a Shetland 536 Suntrip this week, it is hopefully going to be my first boat.

just wondered if you guys could give me anything to specifically check when looking at the boat :) all help gratefully appreciated

Thanks

Adam

PS i have donated to the site but my email address on paypal is not the same as this one does that matter? :?:
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: Newbie Saying Hi!

Post by admin »

Thank you and welcome. I will look for your PayPal and marry it up to your account. I have problems I will come back to you. We have a boat buyin guide on the site that I suggest you print out. It has been compiled by a few of us to give beginners an idea and a guide to what to look for and to avoid. Do not be afraid to ask anything on here. It's been asked before but we all had to start somewhere

Sue Admin
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Newbie Saying Hi!

Post by daveinglasgow »

Hi

have a look at the how to guides on our website http://www.clyde-outboard-services.co.uk/

if you want more help then call me

Dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
digga
Posts: 14
Joined: Sat Sep 07, 2013 9:56 pm

Re: Newbie Saying Hi!

Post by digga »

Thanks for the welcome and help
Should be looking at it on Thursday the plate number on it is 6180 I believe if any one can give me further details that would be great
Thanks
Adam
digga
Posts: 14
Joined: Sat Sep 07, 2013 9:56 pm

Re: Newbie Saying Hi!

Post by digga »

Hey Guys

had a look at the boat this evening, in general she seems in reasonable condition (shes been stood for 18 months)
my only worry is that there is some water between the hulls, the boats been sat levelish so hasnt really had chance to drain,

My Questions are:
If i was to lift her nose high is it possible to drill out some holes for drainage then fill and glass the holes up? does the foam hold water much? and can i drill and fit an inspection hatch to the deck or anything?
i dont want to buy it if its going to need a full floor lift and foam replacement as that would cost and take to much time/skills