family four

Thoughts, Ideas and General Questions
sean
Posts: 3
Joined: Tue Feb 11, 2014 6:32 pm

family four

Post by sean »

hi new to forum doesnt look like the right place to post this but cant post in tech forum anyway very new to boating so any help however simple would be great got the chance of a real nice family four going for a song with nearly new engine realy like the boat and looking around they are very sought after heres the but been left in the water a while as the owner sadly passed away its got water on board in the cabin where the step down in is full and the locker next to the engine not the battery one anchor well? looking at the front of the boat from the outside she is well down in the water much to far to be normal im aware these boats are foam filled so if its got into the there the foam will be soaking (i used to work with this stuff) as its an older model with out the engine platform outside is it just a matter of taking up the floor ply or cutting out the fibre glass floor and renew all im prepared to spend a bit on it at the price and im fine with diy thanks sean
rbmatthews
Posts: 106
Joined: Tue Mar 15, 2011 9:02 am
Location: Northeast Scotland

Re: family four

Post by rbmatthews »

I would be inclined to try getting the water out first before taking the drastic option of removing the existing decking and foam.

We had a similar problem and managed to get it all out from (a) the table socket hole in the cabin, and (b) from one of the deck plugs in the cockpit. We used a syringe that could draw water up from the bottom of these holes by pushing it down through the foam until it reached the hull GRP, and kept doing this over a period of several months until there was no more water to drain. I am pretty confident that we got it all out, including from the foam itself, as that was 4 years ago now and every year I check whether even the slightest amount has accumulated under both cabin and cockpit decks, and there isn't any.

Of course, you also have to make sure that it isn't going to fill up again through leaking windows, hatches, etc. - see another recent thread on the weird and wonderful ways that water can find its way inside a Shetland.

Robin.
Swannanoa, 1989 Shetland Family Four
http://shetlandf4.wordpress.com
sean
Posts: 3
Joined: Tue Feb 11, 2014 6:32 pm

Re: family four

Post by sean »

hi thank very much for that set my mind at rest there i did think that if the hulls are sealed then it should be ok just to get the water out but as i say im mechanically/ diy mineded but new to boating once again thanks