i am due my first BSC and have been informed that the inboard fuel tank on my 4+2 should be earth bonded. Can anybody tell me how I can check if this has been fitted.
Thanks
Steve Wale
earth bonding
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: earth bonding
We own a 4+2 too but bought her already with a BSC. Let me have a look at our check list and see what that means. Our fuel tank is under the floor of the cockpit and not easy to get to but we will look tomorrow for you
sue ADMIN
sue ADMIN
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: earth bonding
Have just pulled out our BSC and our 2.71 and 2.7.2 are both ticked. I have looked int e BSC manual am non the wiser. best bet is to ring a BSC inspector and ask exactly what they mean. But I guess there is some material between anything metal to stop and electrical sparks igniting fuel
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
24077332
- Posts: 13
- Joined: Sat Mar 22, 2014 8:01 am
Re: earth bonding
Thanks to both people who responded to my question. My tank is inboard below the cockpit and the filler is outboard on the port side. Yesterday I checked both to see if they were earthed and the only wire that I could see was the wire to the fuel gauge. I presume therefore that they are not earthed and as such they would fail the BSC. I have taken it to the Marina that I use and left instructions to do what is required to ensure it passes the test. I did not mention the earth bonding so it will be interesting to see if this is picked up. Once again thanks for the response.
Steve
Steve