Looking for a replacement windscreen for a Shetland 4+2 manufactured in 1985-86. Apart from Shetland, anyone got any idea where I might get one?
What I'm looking for is the frame not the glass. So if anyone can give measurememts for this, that would be great - front part only.
4+2 Windscreen
-
billyf
- Posts: 12
- Joined: Thu Aug 11, 2011 1:40 pm
4+2 Windscreen
Last edited by billyf on Mon May 26, 2014 1:26 pm, edited 1 time in total.
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: 4+2 Windscreen
to keep the cost down try a local glass/ acrylic dealer. If you need measurements, we have a 4+2 hardtop 2007 model and can easily take them for you
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
ladydawn
- Posts: 99
- Joined: Tue Feb 26, 2013 4:26 pm
- Location: 4+2 soft top with 75 hp Honda on twin axle extreme trailer .
Re: 4+2 Windscreen
i,ve got a 4+2 soft top and could also take measurements,it will have to be toughened and tempered though . 
-
rbmatthews
- Posts: 106
- Joined: Tue Mar 15, 2011 9:02 am
- Location: Northeast Scotland
Re: 4+2 Windscreen
If you have the old one you could use as a template, even if it is broken, just take it to your local signwriter and they will cut it for you and drill the holes and all (if you need them).
We replaced our front window this year that way: http://shetlandf4.wordpress.com/windows/. We used polycarbonate rather than acrylic, as it is much more impact resistant, although it is more prone to scratching.
So far so good!
R.
We replaced our front window this year that way: http://shetlandf4.wordpress.com/windows/. We used polycarbonate rather than acrylic, as it is much more impact resistant, although it is more prone to scratching.
So far so good!
R.
Swannanoa, 1989 Shetland Family Four
http://shetlandf4.wordpress.com
http://shetlandf4.wordpress.com