davyjones shetland 535
-
davyjones1960
- Posts: 21
- Joined: Fri Jan 31, 2014 1:13 pm
davyjones shetland 535
Finally got it on the water! Still some niggles and jiggles to sort out but each launch is a learning step and we havent drowned yet 
You do not have the required permissions to view the files attached to this post.
Don't you just love boats:)
-
malhiggins
- Posts: 68
- Joined: Thu Sep 12, 2013 1:00 pm
Re: davyjones shetland 535
Hi.
NIce going and may it stay that way.
Mal
NIce going and may it stay that way.
Mal
-
davyjones1960
- Posts: 21
- Joined: Fri Jan 31, 2014 1:13 pm
Re: davyjones shetland 535
Thanks. i see u r in Ireland too - where do u do your boating. Bought this in Sligo late last year and still doing a few jobs but planning to have some fun in it this summer before I take it into the shed coming winter to paint it in the Spring. Most of the work so far has been on the engine. Lovely memories of Galway. I used to spend my hols as a kid in Ballyconeely. Would love to get to sea with this boat eventually but sticking to Lough Derg for this year. Always wanted to boat out of Roundstone for some reason lol. I live on the Tipp side of Lough Derg
Don't you just love boats:)
-
rbmatthews
- Posts: 106
- Joined: Tue Mar 15, 2011 9:02 am
- Location: Northeast Scotland
Re: davyjones shetland 535
Looks fantastic. We are thinking of doing the Shannon from top to bottom in our F4 sometime ourselves - perhaps next year, we will see.
Good luck with the boat.
Rob.
Good luck with the boat.
Rob.
Swannanoa, 1989 Shetland Family Four
http://shetlandf4.wordpress.com
http://shetlandf4.wordpress.com
-
malhiggins
- Posts: 68
- Joined: Thu Sep 12, 2013 1:00 pm
Re: davyjones shetland 535
Hi. Davy.
Apologise for the delay in getting back to you but have been offline for several days now. I live in Headford which is about 24 km from Galway and about 4 km from lake Corrib. As yet my boat has not taken to the water as I'm still doing it up, hopefully, this summer. I know Ballyconneely very well as I work in Letterfrack. Just purchased a old Evinrude 60 HP but the gearbox needs fixed. Would you know of anyone you could recommend as I know nothing about outboards.
Rob. The Shannon is always a good place and I may be doing that in several years time.
Apologise for the delay in getting back to you but have been offline for several days now. I live in Headford which is about 24 km from Galway and about 4 km from lake Corrib. As yet my boat has not taken to the water as I'm still doing it up, hopefully, this summer. I know Ballyconneely very well as I work in Letterfrack. Just purchased a old Evinrude 60 HP but the gearbox needs fixed. Would you know of anyone you could recommend as I know nothing about outboards.
Rob. The Shannon is always a good place and I may be doing that in several years time.
-
davyjones1960
- Posts: 21
- Joined: Fri Jan 31, 2014 1:13 pm
Re: davyjones shetland 535
Hi, Yes I know headford from the traffic reports there always seems to be problems there haha. Corrib looks like a lovely lake. 6 months ago I knew nothing about boats either but I have had lots of help from an irish forum http://www.powerboat.ie/forums/ great bunch of lads and they have recommended places for parts etc to me. I dont know of anyone who does engines over your way but if you join that forum and ask the lads I am sure that there is somebody. I have done most of the work on my engine myself so far with help from the forum.malhiggins wrote:Hi. Davy.
Apologise for the delay in getting back to you but have been offline for several days now. I live in Headford which is about 24 km from Galway and about 4 km from lake Corrib. As yet my boat has not taken to the water as I'm still doing it up, hopefully, this summer. I know Ballyconneely very well as I work in Letterfrack. Just purchased a old Evinrude 60 HP but the gearbox needs fixed. Would you know of anyone you could recommend as I know nothing about outboards.
Rob. The Shannon is always a good place and I may be doing that in several years time.
Do stay in touch and let me know how you get on.
davy
Don't you just love boats:)
-
malhiggins
- Posts: 68
- Joined: Thu Sep 12, 2013 1:00 pm
Re: davyjones shetland 535
Morning Davy.
Like yourself I new to this boaty lark having obtain a second hand Family 4 last November alround you neck of the country. I forgot to ask what size of outboard do you have and is it easy to launch.
Keep in touch
Mal
Like yourself I new to this boaty lark having obtain a second hand Family 4 last November alround you neck of the country. I forgot to ask what size of outboard do you have and is it easy to launch.
Keep in touch
Mal
-
davyjones1960
- Posts: 21
- Joined: Fri Jan 31, 2014 1:13 pm
Re: davyjones shetland 535
hi mal,
my engine came with the boat. I got these really cheap in sligo bought on a whim. Boat is probably 40 yrs old and the engine is 1982. Its a Evinrude 25hp 2 stroke and is away at the moment having a problem investigated. If could do with a bigger motor, especially if we go to sea as we plan to next year. The specs thread on this forum will recommend the maximum hp for your boat and tell you the draft etc. Max hp for my boat is 60hp so I plan to get a 50 before going to see.
I found the first launch surprisingly easy. We launched at Dromineer on Lough Derg on a weekday so there would be less of an audience. I will make a video for you next time we launch to show you how WE do it. Retreival is a bit more tricky and we have found that waders are essential (20 euros in lidl) Weve only launched and retrieved 3 times but have learned so far 3 main things:
1. Dont get the trailer in too deep for retreival. You may get the front of the boat secure on the trailer but the back will want to float side to side especiall if there is an onshore breeze.
2. If launching into a breeze the wind may want to push the boat back up the slip and you cant start the engine there. So after launch get an assistant pulling on a stern (back) rope and walk with it along jetty pier to secure in deeper water.
3. For a beginner, we find that at LEAST 2 people are required to launch/retreive. I am not saying one person cant do it but it takes experience.
Finally, sorry if I am stating the obvious but we learned the hard way...
Ensure engine is tilted fully up before you start driving - speed ramps are very unforgiving and ...
do not lower it on the slipway as the water may not be deep enough!
The repair on our propeller cost us 80 euros and a trip to Wexford!!
Chat soon
Davy
my engine came with the boat. I got these really cheap in sligo bought on a whim. Boat is probably 40 yrs old and the engine is 1982. Its a Evinrude 25hp 2 stroke and is away at the moment having a problem investigated. If could do with a bigger motor, especially if we go to sea as we plan to next year. The specs thread on this forum will recommend the maximum hp for your boat and tell you the draft etc. Max hp for my boat is 60hp so I plan to get a 50 before going to see.
I found the first launch surprisingly easy. We launched at Dromineer on Lough Derg on a weekday so there would be less of an audience. I will make a video for you next time we launch to show you how WE do it. Retreival is a bit more tricky and we have found that waders are essential (20 euros in lidl) Weve only launched and retrieved 3 times but have learned so far 3 main things:
1. Dont get the trailer in too deep for retreival. You may get the front of the boat secure on the trailer but the back will want to float side to side especiall if there is an onshore breeze.
2. If launching into a breeze the wind may want to push the boat back up the slip and you cant start the engine there. So after launch get an assistant pulling on a stern (back) rope and walk with it along jetty pier to secure in deeper water.
3. For a beginner, we find that at LEAST 2 people are required to launch/retreive. I am not saying one person cant do it but it takes experience.
Finally, sorry if I am stating the obvious but we learned the hard way...
Ensure engine is tilted fully up before you start driving - speed ramps are very unforgiving and ...
do not lower it on the slipway as the water may not be deep enough!
The repair on our propeller cost us 80 euros and a trip to Wexford!!
Chat soon
Davy
Don't you just love boats:)
-
malhiggins
- Posts: 68
- Joined: Thu Sep 12, 2013 1:00 pm
Re: davyjones shetland 535
Morning Davy.
Thanks for the advice on launching but it might be a few months before I will be doing that and I shall invest in the waders from Lidl. You say you have trouble with the Evinrude outboard and did you get it fixed. I have just purchased a second hard one which I think it needs the gearbox changed. Keep in touch and have a nice weekend
Mal
Thanks for the advice on launching but it might be a few months before I will be doing that and I shall invest in the waders from Lidl. You say you have trouble with the Evinrude outboard and did you get it fixed. I have just purchased a second hard one which I think it needs the gearbox changed. Keep in touch and have a nice weekend
Mal
-
davyjones1960
- Posts: 21
- Joined: Fri Jan 31, 2014 1:13 pm
Re: davyjones shetland 535
im still here but waiting for my engine to come back from being looked at. I will be back on the forum just as soon as i am back on the water. hopefully within the next week
Don't you just love boats:)