Hi All,
I've just acquired my first 535 that's in need of a bit of love so I've started sprucing before venturing on the water with her. One thing I have noticed when clambering on and off is the floor in the cockpit does give a bit, I'm no lightweight but did wonder it this is normal?
Cheers
535 cockpit floor
-
silversailor
- Posts: 29
- Joined: Thu Oct 20, 2011 4:45 pm
- Location: norfolk
Re: 535 cockpit floor
Hi
regarding your cockpit floor. My 570 has just shown signs of the same problem, and on lifting the carpet have found the plywood floor to be rotten in places. I have managed to replace the worst sections, as I did not want to replace the whole floor. It seems to be OK at the moment. Good Luck
Steve
regarding your cockpit floor. My 570 has just shown signs of the same problem, and on lifting the carpet have found the plywood floor to be rotten in places. I have managed to replace the worst sections, as I did not want to replace the whole floor. It seems to be OK at the moment. Good Luck
Steve
Re: 535 cockpit floor
Thanks for the reply Steve, mine is the fiberglass itself i.e. the hull, not sure if it's normal to have flex in it as I'm used to twin skinned boats
Cheers
Mike
Cheers
Mike