Shetland 500

Thoughts, Ideas and General Questions
pmb6552
Posts: 4
Joined: Sun Jun 08, 2014 6:33 pm

Shetland 500

Post by pmb6552 »

Today I looked at a Shetland 500 (number 956). Can anyone tell me where h to find more information on this boat. The current owner didn't even know what kind of Shetland it was except that it was a 'great' boat. Thanks
pmb6552
Posts: 4
Joined: Sun Jun 08, 2014 6:33 pm

Re: Shetland 500

Post by pmb6552 »

Ok, it seems likely that the boat is a 'Hobby', a version of the 498.

The wheel is on the starboard side and is vertical rather than angled. It has a timber, folding door to the cabin and a good 4'6" headroom. There are two cupboards/lockers either side, no sink or cooker, and standard v-seating. There is no in-fill and no sign of any brackets for one. There are no turnbuttons on the windscreen for a canopy.

It has a textured, gel-coated deck (if that's possible) with a herring-bone type pattern similar to the aluminium plate sometimes used on walkways - I would call it boiler-plate if it was steel. The deck seems solid, as does the transom. There is a small engine bay with seats/lockers either side. The lockers contain fuel tank (s/board) and battery (port). There are brackets for a folding helm seat but no seat. The engine is an ancient Evinrude 50 hp 2-stroke with electric start. It looks a bit tatty but it starts, pumps water and sounds ok with surprisingly little smoke, even out of the water. (The boat was on a trailer with a hose attachment to the intake). Fuel is a 50:1 premix.

Apart from somewhat faded gel-coat, in which you can see the marks from the original decals, and one or two signs of crazing, it's pretty spotless. But, what I cannot see is below the deck, so if anyone could tell me how it is constructed and what nasties to look out for I would be extremely grateful. Maybe a guide to the price would be good too.