Help regarding tiny holes in fibreglass
-
norvin
- Posts: 12
- Joined: Wed Sep 12, 2012 9:13 pm
Help regarding tiny holes in fibreglass
Any advice please. Having just cleaned my Kestrel after outside winter storage I find dozens of tiny holes in the superstructure. some are in groups of a dozen or so and range in size fron a small pin-prick to about 1 mm in diameter, others are single holes at various locations. I am at a loss as to the cause or how to deal with this. Can anybody help please. Many thanks
-
bobtooke
- Posts: 110
- Joined: Sun Aug 11, 2013 11:26 pm
- Location: South London / Newhaven
Re: Help regarding tiny holes in fibreglass
Unless its just blistered paint, it could be osmosis in the Gelcoat. Can you post some pics?
Depending on how bad it is, it should be easy enough to treat with an epoxy coating.
Depending on how bad it is, it should be easy enough to treat with an epoxy coating.
"Don't worry, I'm completely lost too"
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
-
norvin
- Posts: 12
- Joined: Wed Sep 12, 2012 9:13 pm
Re: Help regarding tiny holes in fibreglass
Hi and thanks for your post. I will try to get some pics although it's difficult getting a clear photo against the white background and I'm not too good on "techie" stuff. Anyway here goes.