Hello from Worcestershire/Depth sounder advice

Thoughts, Ideas and General Questions
Post Reply
consumedbynature
Posts: 38
Joined: Wed Apr 20, 2011 10:21 am
Location: Billy Keys, Shetland Black Prince, River Avon Worcestershire

Hello from Worcestershire/Depth sounder advice

Post by consumedbynature »

Hi all,

Just thought I'd say hello as a new member of the site.

Unlike some of you speed demons on here with your exciting 30mph whippets I have a 1979 Shetland 640 Jessica Marie with a 15hp engine which cruises at a maximum of 6 knots on the River Avon in Worcestershire. I'll post some pics when I can work it out.

I'm really enjoying reading all the posts and learning a lot about Shetlands. I'm really pleased with the boat.

Is anyone on the River Avon? If so I hope to say hello as you pass Wyre Piddle

Can anyone on here recommend a good quality, reasonably priced depth sounder which doesn't require drilling a hole in my hull?

Many thanks

Billy
suewright
Posts: 77
Joined: Wed Feb 23, 2011 4:33 pm
Location: TWO CAN Shetland 4+2 Hamble, Hampshire
Contact:

Re: Hello from Worcestershire/Depth sounder advice

Post by suewright »

Hi Billy and welcome.

we use to have a handheld depth/fish finder beofre we bought a super dooper one.
Trawl ebay - they are bright yellow, run on 4 batteries and fit nicely in a mobile phone holder. serch for hand held fish finder
bigbag
Posts: 11
Joined: Sat May 28, 2011 10:45 am

Re: Hello from Worcestershire/Depth sounder advice

Post by bigbag »

Hi Billy
I fitted a Garmin fish finder to my old classic impala and will be transferring it to my Shetland 4+2.
I used 25mm white plastic conduit to run the cable down the outside of the transom. Using saddle clamps I was able to attach to the boat without the need to drill holes below the waterline.
25mm is necessary to be able to feed the cabe and connector through.
Plenty of 2nd hand fish finders around. You can also fit a paddle wheel using the same method, which will give you an indication of speed as well.
Hope this helps.
Cheers
Geoff
Post Reply