Between a Mark II and a 535 ? They both look the same to me. When i google 535, lots of results are shown along with pictures.
When i google the Mark II there's practically nothing to show.
Even Shetland's own website doesn't show much. In their "Past Models" section, they only list boats from the past 40 years. The Mark II was a '68 boat.
The reason i'm so keen to know, is that i have recently purchased one as a reno project and i don't know which one it is.
There's no hull id plate (meant to be near the steering wheel i believe) and i cannot see the stamp on the transom (meant to be in the gel coat at top right when looking at rear of boat ?).
Can anybody throw any light on this please ?
Chris
Mark II - http://www.broads.org.uk/wiki/index.php ... tyle=SdMk2
What's the difference ?
-
bobtooke
- Posts: 110
- Joined: Sun Aug 11, 2013 11:26 pm
- Location: South London / Newhaven
Re: What's the difference ?
Until now I'd never heard of a mkII Shetland, if its a different boat to a 535 I think I may have one myself! I've always assumed it was just an early 535 which is what I'm bought it as.
Since the model later became widely known as the 535, are we sure its not just a reference to being the "mkII" version of that craft?
Since the model later became widely known as the 535, are we sure its not just a reference to being the "mkII" version of that craft?
"Don't worry, I'm completely lost too"
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
-
ShetlandMarkII
- Posts: 3
- Joined: Sun Mar 22, 2015 11:31 am
Re: What's the difference ?
From what i gather, the Mark II was built in 68 (presumably the Mark I (Called simply "Shetland" perhaps?) was too, due to the company being founded in 1968) and i think the early 535 was early 70's and the later 535's late 70's-early 80's
This- http://www.broads.org.uk/wiki/index.php ... tyle=SdMk2 page shows several Mark II's. The only noticeable difference i can see is that all Mark II's have rear corner fenders & the majority of 535's don't.
I'm desperate to find definitive evidence of the exact model of my boat, but as yet i can only go by what i've discovered myself.
This- http://www.broads.org.uk/wiki/index.php ... tyle=SdMk2 page shows several Mark II's. The only noticeable difference i can see is that all Mark II's have rear corner fenders & the majority of 535's don't.
I'm desperate to find definitive evidence of the exact model of my boat, but as yet i can only go by what i've discovered myself.
-
bobtooke
- Posts: 110
- Joined: Sun Aug 11, 2013 11:26 pm
- Location: South London / Newhaven
Re: What's the difference ?
From what I can make out on my boat, the only differences are that it is a "short" transom and the windows are rounded at the back rather than the more pointed shape of later 535's.
There are no rear fenders.
I have a makers plate on the boat but it only identifies compliance, sadly no serial number and since there is no sign of other rivets, I don't believe it ever had a serial plate.
How about your boat? How does yours compare and what it the spec?
There are no rear fenders.
I have a makers plate on the boat but it only identifies compliance, sadly no serial number and since there is no sign of other rivets, I don't believe it ever had a serial plate.
How about your boat? How does yours compare and what it the spec?
You do not have the required permissions to view the files attached to this post.
"Don't worry, I'm completely lost too"
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
-
ShetlandMarkII
- Posts: 3
- Joined: Sun Mar 22, 2015 11:31 am
Re: What's the difference ?
Mine has the short transom and rounded rear windows. It does have rear fenders. No ID on the boat at all, anywhere.
I have emailed shetland about it, They requested photos, the day after i emailed them. I sent photo's but have yet to hear back from them, 4 days later. I wonder if they are wondering too lol
The first 6 years of their production is completely missing from their website
I have emailed shetland about it, They requested photos, the day after i emailed them. I sent photo's but have yet to hear back from them, 4 days later. I wonder if they are wondering too lol
The first 6 years of their production is completely missing from their website
-
bobtooke
- Posts: 110
- Joined: Sun Aug 11, 2013 11:26 pm
- Location: South London / Newhaven
Re: What's the difference ?
Hopefully its just the Easter break at Shetland being why they've not got back. Please do post up their response if you get one.
"Don't worry, I'm completely lost too"
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
-
DACS
- Posts: 77
- Joined: Sat Jul 19, 2014 9:59 am
Re: What's the difference ?
I do think that the rear fenders are much use for identifying boat models as very few boat builders would fit them to new boats. They are usually only fitted by boat owners.
-
vreagh
- Posts: 327
- Joined: Sat Aug 02, 2014 5:46 pm
- Location: Cornwall
Re: What's the difference ?
Hi, I bought my Shetland from Jack Stokes in early 1969>It still has the id plate on it showing hull 588, model is Shetland 69,Side windows rounded at rear,raised lip on forward deck is NOT carried beyond the cabin unlike later boats.Rear corner fenders were not fitted by Jack but were a fad at the time but do stop some damage from quay when in tight spots.Mine certainly look like they`ve been in the wars now.Hope this helps.
-
bobtooke
- Posts: 110
- Joined: Sun Aug 11, 2013 11:26 pm
- Location: South London / Newhaven
Re: What's the difference ?
Thanks for that! As you've got one that came out of the factory, at least it confirms one manufacturing point.
It sounds like mine is identical to yours anyway so it looks like mine is a '69 model too.
Have you a picture you can post? A PIC of the nameplate would be great.
Also, if yours was sold to you as a Shetland 69 I would guess that it was just known as a "Shetland boat" back then and only later did that particular model (with some later mods) become known as the 535 after they started to develop other models of boats.
It sounds like mine is identical to yours anyway so it looks like mine is a '69 model too.
Have you a picture you can post? A PIC of the nameplate would be great.
Also, if yours was sold to you as a Shetland 69 I would guess that it was just known as a "Shetland boat" back then and only later did that particular model (with some later mods) become known as the 535 after they started to develop other models of boats.
"Don't worry, I'm completely lost too"
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
-
vreagh
- Posts: 327
- Joined: Sat Aug 02, 2014 5:46 pm
- Location: Cornwall
Re: What's the difference ?
Hi,Sorry for the delay.Here is the pic of the two plates.Note the address is Jack Stokes`s chandlery address,this was before he finalised escomar`s address.I`ll also try to send a brochure and price list.Regards Keith.