Newbie wants to say Hi

Thoughts, Ideas and General Questions
Post Reply
CaptainPhaff
Posts: 16
Joined: Tue Jul 23, 2013 7:33 pm

Re: Newbie wants to say Hi

Post by CaptainPhaff »

Hi Dave,

Welcome to the forum from another Dave. I have owned my 535 for four years and like you I knew next to nothing about boats until then. I have learned a huge amount in the last four years, including how frustrating and expensive even 'cheap' boat ownership can be!!! In general though most things are fixable with a sensible question on the forum and a few YouTube videos. Good luck and enjoy - the boat should fly with a 70hp 2 stroke, but worth remembering the maximum rating for a 535 was 65hp (I think) so go carefully. Regards David
User avatar
IlsonMark
Posts: 42
Joined: Thu Oct 02, 2014 1:27 pm
Location: Ilkeston, Derbyshire

Re: Newbie wants to say Hi

Post by IlsonMark »

Hello Dave.

Don't think you should have any problems with the 70hp. I've had a 2-stroke 70hp Johnson on the back of my 535 for years, and never had an issue. Gets a good thrashing at full throttle on the sea for a couple of weeks a year, and spends time on the inland waterways the rest of the year.
User avatar
IlsonMark
Posts: 42
Joined: Thu Oct 02, 2014 1:27 pm
Location: Ilkeston, Derbyshire

Re: Newbie wants to say Hi

Post by IlsonMark »

Although should perhaps add that the engine is bolted through a thick piece of marine ply underneath the splashwell, so I guess this adds to the transom strength. But like I said, with this setup, never had an issue with the engine being overpowered.
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Contact:

Re: Newbie wants to say Hi

Post by daveinglasgow »

Hi

The 70 is more than enough. the dream engine is the honda 50hp and that should give 28 knots !

Dave
PS you must declare that the outboard is over max HP for insurance or you will not be covered
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
Post Reply