Shetland 4 plus 2 2010
-
C15886
- Posts: 4
- Joined: Wed Jul 27, 2016 7:08 am
- Location: Cambridge
Shetland 4 plus 2 2010
I have recently bought a Shetland 4 Plus 2 can anyone shine any light on how the aft bed arrangement works, I have tried various configurations but none seem right, help !
John S
-
DavidW
- Posts: 59
- Joined: Thu Jul 24, 2014 7:06 pm
- Location: Wilds of the Fens
Re: Shetland 4 plus 2 2010
There shoul be an infil panel ( or a tabletop) that sits on the two wooden supports attached to the side lockers, put that in place then drop the 2 side back cushions onto it to make a pad...Shouldn't be too difficult unless you've got bits missing...
Shetland Saxon 013 "Wild Dream"
-
C15886
- Posts: 4
- Joined: Wed Jul 27, 2016 7:08 am
- Location: Cambridge
Re: Shetland 4 plus 2 2010
Thanks for the info, you are right the infill panel is the piece missing.
John S
-
ladydawn
- Posts: 99
- Joined: Tue Feb 26, 2013 4:26 pm
- Location: 4+2 soft top with 75 hp Honda on twin axle extreme trailer .
Re: Shetland 4 plus 2 2010
Re Rear berth ,
I found my infill panel under the rear seats, it being 1/2 inch ply that is supported on the 2 Teak blocks fitted forward of the battery box.
I found my infill panel under the rear seats, it being 1/2 inch ply that is supported on the 2 Teak blocks fitted forward of the battery box.