Cutting out the floor on an F4

Thoughts, Ideas and General Questions
Cuttsee
Posts: 9
Joined: Wed Oct 05, 2016 7:45 am

Cutting out the floor on an F4

Post by Cuttsee »

Having looked again at the cockpit floor of my 1982 F4 , i need to tackle the water ingress which undoubtedly has rotted the woodwork and waterlogged the foam beneath the floor. Reading other people's accounts they make no mention of how they supported the hull while the process was carried out. The floor presumably is an integral part of the structure and as it is removed the boat could twist if not properly supported. Is there a way of ensuring it is straight before putting the floor back in? The boat at the moment is on four stands and a gas bottle under the keel at the bow.
Stokey1964
Posts: 164
Joined: Sun Dec 07, 2014 1:54 pm
Location: Stoke-on-Trent

Re: Cutting out the floor on an F4

Post by Stokey1964 »

The stringers are glassed into the outer skin so will keep the hull intact.

have a look at my pictures on here and you will see a picture of them before I put my new floor in

Simon


http://s1286.photobucket.com/user/stoke ... t=3&page=1
Shetland 570 MK 1
Yamaha 90 2006
Cuttsee
Posts: 9
Joined: Wed Oct 05, 2016 7:45 am

Re: Cutting out the floor on an F4

Post by Cuttsee »

Hi Simon. Tried to follow your link to your photo bucket pictures but all I got was a load of adverts. I have also tried using the link from another of your threads but got the same. Consequently I haven't been able to view the pictures. Roger
Stokey1964
Posts: 164
Joined: Sun Dec 07, 2014 1:54 pm
Location: Stoke-on-Trent

Re: Cutting out the floor on an F4

Post by Stokey1964 »

Just checked and the Album is def public viewing

click on continue to site if you get the adverts


Simon
Shetland 570 MK 1
Yamaha 90 2006
Cuttsee
Posts: 9
Joined: Wed Oct 05, 2016 7:45 am

Re: Cutting out the floor on an F4

Post by Cuttsee »

Hi Simon tried the link again on my computer at home and it worked fine. For some reason my mobile doesn't want to take me to the pictures but loads all sorts of junk instead.
Looking at the pictures there are three stringers fibreglassed into the hull, but did the floor rest on three rafters which sit on the internal curve of the hull leaving a gap between the stringers and the floor or does it sit on the stringers? My boat is an F4 but presumably it is the same as a 570 in terms of its construction. Many thanks Roger
Stokey1964
Posts: 164
Joined: Sun Dec 07, 2014 1:54 pm
Location: Stoke-on-Trent

Re: Cutting out the floor on an F4

Post by Stokey1964 »

The floor should sit on the stringers


although you can only see 3 in the picture theres 4


Simon
Shetland 570 MK 1
Yamaha 90 2006