610 hull speed

Thoughts, Ideas and General Questions
ian4610
Posts: 8
Joined: Thu Sep 29, 2016 1:22 pm

610 hull speed

Post by ian4610 »

hi all
ive fitted a mercury 90 hp 2 stroke engine to my 610 I think they call it a blue band motor and just wondered if anyone could tell me the hull speed of my boat and what I could expect out of the engine as I am taking it coastal, and if there are any problems that I should look out for with this engine.
many thanks
ian
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: 610 hull speed

Post by daveinglasgow »

Hi

you should get about 28 mph but if you put an XR" racing engine on it you will get over 55 mph but this is really very not recomended. also check there is enough forward weight
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
ian4610
Posts: 8
Joined: Thu Sep 29, 2016 1:22 pm

Re: 610 hull speed

Post by ian4610 »

hi dave
thank you, I have put the 90hp 2 stroke on and its back in the water now sitting just like it did with the 15hp 4 stroke which I cant understand but I think I was worrying a bit too much.
thanks for your help
ian
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: 610 hull speed

Post by daveinglasgow »

Hi

can you call me I think I can help

0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices