Perfect Dave thank you. I popped over to Walton Marina and had a look over Bob (blebrocq)'s shiny new 4+2 which has the same set up except it's petrol not water, good to see the boat and meet up, thanks Bob!
Dave, I've been looking online but I'm clearly not using the right term for the thru deck fitting you have on the floor. Where did to you get it?
Cheers, Clive
New inboard fuel tank
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: New inboard fuel tank
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: New inboard fuel tank
Two points Clive,
I’ve only had to replace one fuel line in over 25 years, your constant need to buy new primer bulbs is unusual.
How normal is an permanently vented petrol container on a boat? Diesel yes, but I always understood petrol needs to have an airtight seal for storage.
I’ve only had to replace one fuel line in over 25 years, your constant need to buy new primer bulbs is unusual.
How normal is an permanently vented petrol container on a boat? Diesel yes, but I always understood petrol needs to have an airtight seal for storage.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: New inboard fuel tank
You’ve probably found a better product than me! Answered your Q in my other post. Fitting the breather is part of the BSC for inland boats with fixed tanks. The pipe needs to extend up first so rain / waves can’t let water get in. Not seen any mention of problems with petrol. That said I always add Fuel Set to my petrol on the boat, it prevents any problems. I also don’t store fuel over winter.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: New inboard fuel tank
The only primer bulb I replaced was an unknown age one on my first boat. Ones supplied with new Johnson and Yamaha motors lasted at least as long as I had the engines, each 10yr plus.
Does the breather pipe have a shut off for when the boat is not in use? I can see the point in having the breather outboard when the motor is running or during refuelling, but all the volatile fumes that give the octane rating would soon disperse to atmosphere if left open permanently.
Does the breather pipe have a shut off for when the boat is not in use? I can see the point in having the breather outboard when the motor is running or during refuelling, but all the volatile fumes that give the octane rating would soon disperse to atmosphere if left open permanently.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
blebrocq
- Posts: 108
- Joined: Thu Oct 20, 2022 11:24 am
Re: New inboard fuel tank
Neat trick to run the engine on water, mus save you a fortune !
Bob
Bob
-
blebrocq
- Posts: 108
- Joined: Thu Oct 20, 2022 11:24 am
Re: New inboard fuel tank
Just noticed that is your water tank not fuel !
Bob
Bob
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: New inboard fuel tank
Haha
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
daveflack
- Posts: 291
- Joined: Fri Nov 08, 2013 6:54 pm
- Location: Black Hawk "Atlast"Ullswater, now a 4+2
Re: New inboard fuel tank
Hi Clive, this is what I used, not sure where I got it from tho, I think mine is 100mm size, then I cut the bellows to suit the size of the pipe.
You do not have the required permissions to view the files attached to this post.
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: New inboard fuel tank
Not sure if I'm overthinking here but I keep going round in circles then confusing myself!
The tank vent is connected to the tank by a hose (16mm in my case), but as mentioned, that is not good if I store fuel on the boat. This would only be in summer so temperature variations and condensation aren't too much of a problem (I drain the system for winter). I still think I need to be able to close the vent, so would a ball valve be ok, placed either close to the tank or to the vent?
Then I'm thinking about maybe having a one way check valve on the inlet hose, for two reasons. One extra security against syphoning if moored and I'm not around and the other hopefully never, if the boat sinks or capsizes, it will help prevent fuel escaping. Might not find one for fuel.
Any thoughts on fuel senders and gauges? Big price differences but some of the cheaper ones on Amazon have a lot of good reviews. Having to keep to all stainless as that's the tank fabrication.
I'm planning on a cap on the tank so I can syphon it off in the winter. Have I missed anything for BSS?
Cheers, I'll post pictures of this latest upgrade as it goes.
The tank vent is connected to the tank by a hose (16mm in my case), but as mentioned, that is not good if I store fuel on the boat. This would only be in summer so temperature variations and condensation aren't too much of a problem (I drain the system for winter). I still think I need to be able to close the vent, so would a ball valve be ok, placed either close to the tank or to the vent?
Then I'm thinking about maybe having a one way check valve on the inlet hose, for two reasons. One extra security against syphoning if moored and I'm not around and the other hopefully never, if the boat sinks or capsizes, it will help prevent fuel escaping. Might not find one for fuel.
From what I've been reading dellquay13, fixed fuel tanks have to be vented to avoid the risk of splash back when filling. I've not read anything about the implications for storage but agree with you, hence my thoughts about a ball valve.dellquay13 wrote: Mon Feb 06, 2023 12:40 am How normal is an permanently vented petrol container on a boat?
Any thoughts on fuel senders and gauges? Big price differences but some of the cheaper ones on Amazon have a lot of good reviews. Having to keep to all stainless as that's the tank fabrication.
I'm planning on a cap on the tank so I can syphon it off in the winter. Have I missed anything for BSS?
Cheers, I'll post pictures of this latest upgrade as it goes.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
blebrocq
- Posts: 108
- Joined: Thu Oct 20, 2022 11:24 am
Re: New inboard fuel tank
My current boat (4+2) has a permanantly open vent on the fixed inboard fuel tank.
(As you know). My previous boat had a removable 25Ltr tank with a screw type vent in the center of the filler cap. With the tank on board, I only ever closed the vent if I was towing it on its trailer. Afloat it was always open. Never had a problem.
Bob
(As you know). My previous boat had a removable 25Ltr tank with a screw type vent in the center of the filler cap. With the tank on board, I only ever closed the vent if I was towing it on its trailer. Afloat it was always open. Never had a problem.
Bob