Family Four restoration advice needed.

Thoughts, Ideas and General Questions
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Family Four restoration advice needed.

Post by dellquay13 »

Bilge paint sounds right for the bilges...
As for the sides (topsides or higher up, coamings, gunnels are the very top where rowlocks would be fitted if it was a rowing boat) are done in topsides paint if you don't mind the marine surcharge on what is basically just oil based paint. I replaced the fabric lining in the cockpit with vinyl cloth.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Re: Family Four restoration advice needed.

Post by Adam »

dellquay13 wrote: Wed Jun 16, 2021 7:51 pm Bilge paint sounds right for the bilges...
As for the sides (topsides or higher up, coamings, gunnels are the very top where rowlocks would be fitted if it was a rowing boat) are done in topsides paint if you don't mind the marine surcharge on what is basically just oil based paint. I replaced the fabric lining in the cockpit with vinyl cloth.
Thank you for the info !
I've painted the sides 2 years ago with garage paint. I did prepare the surface as it should be done and.... It wasn't right paint for the job. It started to coming off massively and I had to strip it down last week and its almost ready for paint.
I know that the word "marine" on a tin doubles the price :o
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Family Four restoration advice needed.

Post by Clive »

Adam wrote: Wed Jun 16, 2021 8:09 pm I know that the word "marine" on a tin doubles the price
Very true, but marine also stands for ‘extreme environment’ and after all the effort you’ve put in, if it were me I’d get the proper stuff. Salt water is very corrosive. It’s an investment at the end of the day so spend as much as you can afford.
I finished spraying my repaired outboard foot the other day. Used marine spray paint and it was a joy to use. Metallic silver just lay down perfectly - felt like a professional after 😄. Primer, paint and acrylic clear topcoat. Expensive but so worth it.
Look forward to seeing the results.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
KenGreenaway
Posts: 11
Joined: Tue Apr 20, 2021 1:34 pm

Re: Family Four restoration advice needed.

Post by KenGreenaway »

What colour is used for shetland boats? Is it "cream" or "ivory white" and where can it be bought? Previous owner simply drilled holes all over the place when he needed to feed a cable and the result is I need to fill in and repaint most of the cockpit area. I can't understand people who have no pride in their boats!
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Family Four restoration advice needed.

Post by dellquay13 »

Is your boat painted or still in the gelcoat? Some people use colour matching apps on a smart phone to get the nearest match. The colour varies with what year the boat was made, and how the surface has aged.
'cream' or 'ivory white' are at best related to each brand only, and very variable.
As for pride in boats, different owners expect different things, some people are proud of the robustness and seaworthiness, and how safe they feel when over the horizon, some people like a well presented boat when overlooked from a lockside.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
KenGreenaway
Posts: 11
Joined: Tue Apr 20, 2021 1:34 pm

Re: Family Four restoration advice needed.

Post by KenGreenaway »

Still in the gelcoat but I need to paint over the sections I've had to fill in. I could go for a complete contrast as long as I keep symmetry. This option appears more attractive the more I think of it, a bit of individuality.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Family Four restoration advice needed.

Post by dellquay13 »

I would always keep patching gelcoat. Once painted you can never stop, it can look cheap, and later, potential buyers ask what it is hiding
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Family Four restoration advice needed.

Post by Clive »

I'm with dellquay13 on this one. Having just had 3 goes at matching gelcoat, the result is so worth the initial pain. I bought my repair kit from East Coast Fibreglass Supplies who are super helpful, https://www.ecfibreglasssupplies.co.uk/ ... r-gel-coat. I first tried RAL 1013 Oyster White which looked good until rubbed back and was too dark. Eventually found (on same site) Scott Bader and BS Colours, Cream 3969 (BS10B15) which worked as well as I could hope. Filled a ding in the GRP, associated spider cracks and cable hole in transom plus many screw holes.
First pic shows transom with cables hole filled, the darker spots are the Oyster White which will be behind a fender.
Second pic shows prep before filling.
Third pic shows gelcoat repair to gunnel corner. Under the rubbing strip was some more damage which looks good now. Just work your way thru the wet and dry as specified!

Depends how long you plan to keep the boat!
You do not have the required permissions to view the files attached to this post.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.