speedwell stiff steering
-
callawaydave
- Posts: 4
- Joined: Fri Oct 26, 2012 3:32 pm
- Location: margate kent
speedwell stiff steering
My speedwell has fairly stiff steering, i have cleaned out the tube on the engine everything is free, 60 hp merc turns very freely no problem there, with cable not connected steering is still stiff there are no kinks or damage does anybody know how to lube a cable and can it be taken apart or is it a throw away lob, boat used in fresh water all the time
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: speedwell stiff steering
chuck it. bad steering can kill you!
oh and make sure it for the higher rated engines as the cross over is 55hp.
happy to supply but this is cheap stuff so fleebay and your local marine place will have it as well along with other online shops.
Dave
oh and make sure it for the higher rated engines as the cross over is 55hp.
happy to supply but this is cheap stuff so fleebay and your local marine place will have it as well along with other online shops.
Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices
-
callawaydave
- Posts: 4
- Joined: Fri Oct 26, 2012 3:32 pm
- Location: margate kent
Re: speedwell stiff steering
Thanks for the info boat comming out of water soon will rectify then thanks again Dave
-
onewatt
- Posts: 13
- Joined: Wed Nov 14, 2012 6:35 pm
Re: speedwell stiff steering
I agree with the previous poster, change it!!!
When you have the new cable connected, I have found (in my experience), that gearbox oil applied to the rod part of the new cable should stop it seizing as easily next time. I have used so many different things on it and the all seem to clog it up and make it get tight over time but the gearbox oil doesn't go hard and aslong as its applied fairly regularly then the cable should have many years in it
Mike
When you have the new cable connected, I have found (in my experience), that gearbox oil applied to the rod part of the new cable should stop it seizing as easily next time. I have used so many different things on it and the all seem to clog it up and make it get tight over time but the gearbox oil doesn't go hard and aslong as its applied fairly regularly then the cable should have many years in it
Mike
-
inspiral
- Posts: 52
- Joined: Wed Sep 12, 2012 8:21 am
- Location: Glasgow
Re: speedwell stiff steering
Our steering is stiff too. How much are we talking for a cable ? Oh and how difficult is it to change ?
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: speedwell stiff steering
depends on your engine hp but 50-80 max depending on length, engine size etc. I am also not a fan of putting anything on them as what ever you use will get dirt in it and this will then get up the sleeve.
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices