Keel configuration

Thoughts, Ideas and General Questions
KenHurst
Posts: 23
Joined: Fri Feb 15, 2013 8:11 am

Keel configuration

Post by KenHurst »

My mooring application asks me for the keel configuration of my 535. ? And HUN number. ?
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: Keel configuration

Post by admin »

Keel configuration is for sail boats. A keel is the large fin protruding from the hull of a boat to stop it "keeling" (its where the word came from ") over sideways.
Shetlands dont have one. Marinas ask especially if your boat is on a drying mooring. They need to know how much draft your entire hull/keel needs.

By HUN I think you mean HIN - hull idententification number - somewhere on your boat hull will be a large number about 12 digits long (on our 570 its at the back near the engine on the transom) to look there first. However due to paint or wear and tear it may be missing or worn away. It is like a registration number of a car. If you do find it, keep it with your insurance details - police ask for it if your boat is stolen

This might help

http://www.boatsafe.com/nauticalknowhow/hin.htm
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
KenHurst
Posts: 23
Joined: Fri Feb 15, 2013 8:11 am

Re: Keel configuration

Post by KenHurst »

Thanks; I was getting bogged down with an Internet search that was giving me specs like 'semi V planing' which, thinking about it is fair enough but has more to do with hull profile than, as you say, a sailboat fixed or lifting keel.
Bizarrely, the form actually asked for HUN number but, again as you point out, it must be a misprint.
Thanks again for the help.