Page 1 of 1
Shetland 27 Outboard: Stern on Mooring
Posted: Wed Apr 17, 2013 10:24 pm
by TimD1
Has anyone got experience of stern on moorings in a 27 o/b? I am thinking of moving mine to the Broads where there are lots of stern on moorings. The outboard projects beyond the bathing platform and needs to be protected from hitting the dock. Further I need a way of getting a man ashore with a line to moor up. Someone out there must have an answer to this issue.
Thanks in anticipation.
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Thu Apr 18, 2013 6:34 pm
by admin
Best way to protect an OB is with a plastic bucket. When you say stern to moorings, are you talking about piles, pontoons or against a wall?
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Thu Apr 18, 2013 8:40 pm
by stephenthomas
Hi TimD1, I have done stern on mooring on the Broads but with a inboard, and the way we did it was to line up with your mooring and start to go astern, about 3/ 4 ft before you get to the bank you need to have a member of crew up front and drop a mud anchor and tie it off on your front bollard. Then get the crew member to the aft of the boat ready to tie off at your mooring, tieing off one wrap from your port aft cleat and another from your starboard aft cleat. Both got to shore bollards port & Starboard. The boat should now be secure. we never had a problem doing it like this even in windy conditions.
Hope this helps
Steve
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Thu Apr 18, 2013 9:17 pm
by TimD1
Thanks for these replies. Most stern to moorings on the broads are against a wall I guess. It is slightly more tricky with an outboard than an inboard in that the o/b on a 27 is mounted on the bathing platform and projects well beyond the stern of the boat, ie if unprotected it is the first thing to hit the dock and the crew member will have to take a big step to get onto the dock therefore.
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Thu Apr 25, 2013 10:33 pm
by broadsluise
Sorry me old china, but it’s a no-go….
I’ve a 4 plus 2 with the same bathing platform/outboard arrangement, frees cockpit space but means you’re restricted to alongside mooring. But the vast majority of Broads mooring is alongside, even at Wroxham (Hoveton) and Loddon where it’s stern-to only there are alternatives not too far away. And not being able to moor at Ranworth is no biggie, mudweight in the Broad itself.
Peter
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Fri Apr 26, 2013 9:47 pm
by stanfolds
I have overcome the problem by bows to mooring, drop the mudweight astern (one from each quarter is even better). It can be more difficult getting on and off the boat but is more private, passers by can't stare into your living/bedroom.
Stan
PS Difficult to do single handed and make sure you don't foul the prop.
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Sun Apr 28, 2013 10:05 pm
by TimD1
Thanks Stan and Peter, really helpful advice from both of you. Much appreciated guys.
Tim.
Re: Shetland 27 Outboard: Stern on Mooring
Posted: Mon May 13, 2013 7:39 am
by Bundegi
Hi,
Found this video clip on youtube,
http://www.youtube.com/watch?v=SUsblkwUWZU
This might be of some assistance to you.
Regards