OLD 536

Thoughts, Ideas and General Questions
charliejo
Posts: 22
Joined: Thu May 16, 2013 7:14 pm

OLD 536

Post by charliejo »

Hi All

Just purchased a 536, well I think it is, looks like a 535, but the helm is on the right hand side rather than the left, it’s double skinned and foam filled, does this sound like the right description of a 536???

Would like to now add an outboard, as I am new to this boating game, any advice would be appreciated, I am currently looking at a 9.9 HP Honda 4 stroke, will this be enough to push???

The boat will only be on a lock with a 10mp speed limit anyways, so don't think I will need anything bigger, or am I going in the wrong direction????
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: OLD 536

Post by daveinglasgow »

yes if there are no currents. oh and that engine is v old but a great workhorse so please check compression and give it a full service before you use it.

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
charliejo
Posts: 22
Joined: Thu May 16, 2013 7:14 pm

Re: OLD 536

Post by charliejo »

Thanks Dave, how do you check compression? what’s right and what’s wrong, what do I need to lookout for,????
Paul
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: OLD 536

Post by daveinglasgow »

compression testers are bought from any car parts place, http://www.ebay.co.uk/itm/PETROL-ENGINE ... 46047f96df

simply remove 1 spark, screw in the tester to a strong hand tight, pull the start cord a few times ( we do 5 as standard) and note reading. replace spark plug and lead and then do the other 1.

the readings should be the same. if more than 10% out dont touch it as its a door stop

oh this is also worth a look: http://www.clyde-outboard-services.co.u ... rd-engines

if in any doubt at all please please call me as there is lots of rubbish out there a


Dave
0759 563 8185
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
waveaway
Posts: 1
Joined: Sun May 26, 2013 9:23 am

Re: OLD 536

Post by waveaway »

Hi, I have a 536 main outboard 40 hp, back up outboard 6hp pushes along @ 4,5 knots in the sea. Hope this helps you, Jon
charliejo
Posts: 22
Joined: Thu May 16, 2013 7:14 pm

Re: OLD 536

Post by charliejo »

Might just go for a four stroke 6hp then, as it will be easier, and the 10 mph speed restriction on the loch, thanks for the advice, pointless going for a big engine if we can’t get to open it up, suppose a 6hp will be enough for fishing.

Any ideas where will I get a windscreen from for a 536, and even a cover and frame ?????

Thanks

Paul