Water leak??

Thoughts, Ideas and General Questions
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Water leak??

Post by aza76 »

Hi all I'm in the middle of restoring a 535 after sanding away all the flaking paint in the cabin I started on the floor when I came across a piece of old repair I put my scraper under and the whole thing came off in one piece leaving a hole just inside the cabin door

Now it just seems to be seeping water out the whole where the repair was any ideas??

Thanks
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Re: Water leak??

Post by aza76 »

This is wear the old repair was the resin on old repair came off easy in one chunk now water is seeping out??
You do not have the required permissions to view the files attached to this post.
project 535
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Re: Water leak??

Post by aza76 »

Just inside cabin door, it's got me really worried what it may be??
project 535
User avatar
davidemania
Posts: 95
Joined: Tue Mar 05, 2013 6:15 pm
Location: Monfalcone, eastern north Italy

Re: Water leak??

Post by davidemania »

it is normal for polyester resin to absorb water, on my boat I had a similar experience. I removed a badly done repair and under it I found a lot of rotten water with a terrible smell. The solution is to take away everything you can (the original resin should be fine, at least mine was) and redo the job with more care. It takes only a tiny hole to quickly fill cavities with water, that never goes away.

Is it possible to have a look under the floor of the outside part? May be a webcam could help... just to be sure there are no surprises there.

ciao
Davide
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Re: Water leak??

Post by aza76 »

thanks for reply,

im not to sure to be honest this is my first project, the hole was quite large when the old repair was removed the water seems to be coming from under the fibre glass in front off repair ill take another pic tom off the hole that i was left with tommorow

everything else seems to be sound and no other wet areas inside cabin

thanks

arran
project 535
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Re: Water leak??

Post by aza76 »

I removed the fibreglass and found that the wood was rotten underneath I've removed it all and seems to be drying out fairly quick ill leave it to dry for a week or so before I replace new wood and re glass
You do not have the required permissions to view the files attached to this post.
project 535
User avatar
davidemania
Posts: 95
Joined: Tue Mar 05, 2013 6:15 pm
Location: Monfalcone, eastern north Italy

Re: Water leak??

Post by davidemania »

I would substitute wood with termanto (a hard PVC foam) or something similar, it is lighter and much more resistant to rotting.

The only problem could be buying a small amount, but you can ask in a yard, they usually have many relatively small pieces they don't need.

ciao
Davide
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Re: Water leak??

Post by aza76 »

thanks davide,

i.ve tried googling the pvc foam but cannot seem to find it?
project 535
User avatar
davidemania
Posts: 95
Joined: Tue Mar 05, 2013 6:15 pm
Location: Monfalcone, eastern north Italy

Re: Water leak??

Post by davidemania »

Google gives many hits (but may be for you it is different, it seems to learn as we search an personalize answers). One of them is

http://www.pvc-core.com/en/page.html?Id=25

or

http://www.netcomposites.com/guide/other-foam-cores/45

I searched for "polyvinyl chloride foam sandwich". It is not too easy to find it online because it is sold in large sheets that are rigid and difficult to ship with couriers, but if you have a ship yard near you they will have it (or something equivalent) for sure.

ciao
Davide
aza76
Posts: 29
Joined: Fri May 10, 2013 10:49 am

Re: Water leak??

Post by aza76 »

hi thanks for reply i've found this? www.cfsnet.co.uk/acatalog/100mm_PU_Foam_Sheet.html

would this be any use?

thanks again

arran
project 535