Shetland 535 canopy frame
-
bevclarke
- Posts: 18
- Joined: Tue Mar 15, 2011 9:29 am
Shetland 535 canopy frame
Wanted a canopy frame for a 535 or even a sketch with dimensions, and also the canopy even if very old.. Thanks 
-
wwwbgoddardcouk
- Posts: 6
- Joined: Sat Oct 26, 2013 8:10 am
Re: Shetland 535 canopy frame
bevclarke wrote:Wanted a canopy frame for a 535 or even a sketch with dimensions, and also the canopy even if very old.. Thanks
Hi Sorry
I cant help you on this, but it would be great if you could share your info when you find one? We are in the same boat lol
-
bobtooke
- Posts: 110
- Joined: Sun Aug 11, 2013 11:26 pm
- Location: South London / Newhaven
Re: Shetland 535 canopy frame
Likewise! I posted up a little while back for someone with pics of a canopy frame but alas no reply as yet.
I know others have suggested making a frame up using cheap plastic overflow tube first to get the right dimensions then make up the proper frame from stainless. It would be good to see an original frame though, just to see the "correct" fittings.
Please share the info if you have any luck...
I know others have suggested making a frame up using cheap plastic overflow tube first to get the right dimensions then make up the proper frame from stainless. It would be good to see an original frame though, just to see the "correct" fittings.
Please share the info if you have any luck...
"Don't worry, I'm completely lost too"
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
Currently aboard "Sweet Kismet", Shetland 535 / Honda 50
Experts in freshwater treatment to the marine industry.
http://www.amphibia.co.uk
-
wwwbgoddardcouk
- Posts: 6
- Joined: Sat Oct 26, 2013 8:10 am
Re: Shetland 535 canopy frame
Will do matebobtooke wrote:Likewise! I posted up a little while back for someone with pics of a canopy frame but alas no reply as yet.
I know others have suggested making a frame up using cheap plastic overflow tube first to get the right dimensions then make up the proper frame from stainless. It would be good to see an original frame though, just to see the "correct" fittings.
Please share the info if you have any luck...
Ben
-
georgewright
- Posts: 31
- Joined: Wed Apr 03, 2013 6:56 pm
Re: Shetland 535 canopy frame
Hi
I have been looking for a canopy and frame, for my 535 or even ways to make 1. For ages now
If you have any luck with plans it would be very much appreciated if you could post it
I will of coarse do like wise
Kind regards
George
I have been looking for a canopy and frame, for my 535 or even ways to make 1. For ages now
If you have any luck with plans it would be very much appreciated if you could post it
I will of coarse do like wise
Kind regards
George
-
Crooty78
- Posts: 3
- Joined: Fri Jan 03, 2014 8:09 pm
Re: Shetland 535 canopy frame
Hi everyone, I'm also looking for info and dimensions on making a canopy and frame. I've got a 536 suntrip. Thanks
-
rbmatthews
- Posts: 106
- Joined: Tue Mar 15, 2011 9:02 am
- Location: Northeast Scotland
Re: Shetland 535 canopy frame
Hi everyone
Since no one has replied to this yet, I'll try. We have a Family Four rather than a 535, but I think that the dimensions are pretty similar as the F4 was derived from the 535. Another 535 owner might be able to confirm if they are the same or similar.
We replaced our pramhood frame last year as the old one was getting a bit past it. You can see the dimensions at:
http://shetlandf4.wordpress.com/canopy/
If you are making your own, I would be inclined to make the vertical legs a bit longer than I have indicated, then cut them back to size once you have the canopy in place and tensioned correctly all round. It's better to have them too long initially rather than too short.
Hope this helps,
R.
Since no one has replied to this yet, I'll try. We have a Family Four rather than a 535, but I think that the dimensions are pretty similar as the F4 was derived from the 535. Another 535 owner might be able to confirm if they are the same or similar.
We replaced our pramhood frame last year as the old one was getting a bit past it. You can see the dimensions at:
http://shetlandf4.wordpress.com/canopy/
If you are making your own, I would be inclined to make the vertical legs a bit longer than I have indicated, then cut them back to size once you have the canopy in place and tensioned correctly all round. It's better to have them too long initially rather than too short.
Hope this helps,
R.
Swannanoa, 1989 Shetland Family Four
http://shetlandf4.wordpress.com
http://shetlandf4.wordpress.com
-
malhiggins
- Posts: 68
- Joined: Thu Sep 12, 2013 1:00 pm
Re: Shetland 535 canopy frame
Hi R.
Thanks for putting this information on the website as I have found it very useful. I’m in the same boat, sorry I could not resist that pun, as the other fellas because I’m looking for the frame dimensions for a Family Four Mark 2. I costs an arm and a leg to purchase a frame from Shetlands and all they are is tubing. I don't think them to post to Ireland anyway.
Thanks again.
Malachy
Thanks for putting this information on the website as I have found it very useful. I’m in the same boat, sorry I could not resist that pun, as the other fellas because I’m looking for the frame dimensions for a Family Four Mark 2. I costs an arm and a leg to purchase a frame from Shetlands and all they are is tubing. I don't think them to post to Ireland anyway.
Thanks again.
Malachy
-
rbmatthews
- Posts: 106
- Joined: Tue Mar 15, 2011 9:02 am
- Location: Northeast Scotland
Re: Shetland 535 canopy frame
You're welcome.
Swannanoa, 1989 Shetland Family Four
http://shetlandf4.wordpress.com
http://shetlandf4.wordpress.com
-
Pmompppp
- Posts: 20
- Joined: Tue Oct 15, 2013 7:25 pm
- Location: London
Re: Shetland 535 canopy frame
Got the frame no cover your welcome to it easy to recover and fit